43 mm Adapter for router motors (OFL1.0 & 2.0)

sauter 43mm adapter for fitting router motors to the sauter lifts OFL1.0 & OFL2.0

Retrofit kit for our lifts, for router motors with 43 mm neck

By means of the conversion kit, a mounting adapter for the sauter router lifts, motors such as Suhner and Kress can now be used perfectly on previous lift constructions. Perfect Holding force due to perfect form closure. No routing depth loss, simple cutter change above the table top. - Genuinely Made in Germany!

Technical Data

• Clamping neck Ø 43 mm
• Tolerances of the  motor neck -0,135 + 0,015
• Required clamping height of the motor: 20 mm
• Max. Weight of the  motor: 5 kg
• NOTE: Use is only permitted in combination with sauter  OFL1.0 or OFL2.0.
• Not suitable for sauter OFL2.0-MINI

Features and advantages

• Quality from Germany - first-class, solid construction. Construction made of high-quality steel.
• Installation made easy - Simple installation of the adapter on the milling lift (installation instructions enclosed).
• No need to drill your own holes - mounting holes for quick installation are already provided.
• No loss of routing depth!
• Easiest cutter change thanks to the spindle and colletstill looking out from above!

Approved  motors:

• Cress: 530 FM, 800 FME, 1050 FME
• MAFELL: FM 1000
• SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RF
• If your motor is not listed, please check the tolerances of the clamping neck to your model as specified by the manufacturer or contact us.

Scope of delivery

• 1x mounting adapter ADAP43-OFL,
• mounting screws and washers,
• mounting instructions (german)