NEW. INNOVATIVE. PROFESSIONAL.
 MO. - FR. 08:30 - 12:30 HRS / 14:00 - 17:30 HRS

Tear-free saws for table and hand circular saws

Tear-free cuts in board materials coated on both sides, i.e. cut edges that look the same to the naked eye and on which no tears can be detected, are the wish of many carpenters, joiners and other woodworkers.

FREUD took care of this problem and developed two differently equipped types carbide circular saw blades, which obtain both outstanding cutting results, which one with can be called tear-free in good conscience.

The blades equipped with hollow roof teeth are particularly suitable for stable circular table saws, vertical saws and format saws. The slightly larger chip spaces provide optimum chip removal and the hollow grinding of the tooth face, the second saw tooth, cuts coated wood materials absolutely tear-free. These leaves can be resharpened several times. However, we recommend that you use the special Tooth shape during resharpening.

Steep-tooth-tipped alternating tooth blades are the alternative answer to the question of tear-free cutting edges even on the underside of coated panel materials. Here FREUD offers a very noble, simply sharpenable, but extremely sharp circular saw blade, which obtains outstanding cutting results on table circle or crosscut saws. Double-sided coated Chipboard, MDF, laminate, coated strips, profiles, picture frames, etc. are the materials for which the FREUD steep tooth blade should be used. You will get cut edges that deal with to the naked eye !

All FREUD circular saw blade types are coated with a special silver coating (silver or red), which offers optimal corrosion protection, as well as the sliding characteristics of the blades clearly and thus significantly increases the service life of the blades.

These two types of saws are only available as super silent versions, i.e. optimum noise insulation, very quiet blades.

If you have any further questions about these special carbide circular saw blades for tear-free cutting, give us a call and we will be happy to advise you.

Close filters
 
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
Circular saw blade HM 140 x 1.8/1.3 x 20 mm, Z=42

Coated plates | tear-free | alternating tooth

€50.40 *
FR-FR04L001H

Delivery time 3 - 5 days **

Circular saw blade HM 160 x 2,2/1,6 x 20 mm,...

Special saw blade for coated wood-based panels | Tear-free
No scorer required | Interchangeable steep tooth

€99.61 *
FR-LU3A-0001

Delivery time 1 - 2 days **

Circular saw blade HM 160 x 2.2/1.6 x 20 mm, Z=48

Coated plates | tear-free | trapezoidal flat tooth

€54.12 *
FR-FR06L002H

Delivery time 1 - 2 days **

Circular saw blade HM 160 x 1.8/1.2 x 20 mm, Z=48

Coated plates | tear-free | alternating tooth

€49.54 *
FR-FR06L003HC

Delivery time 1 - 2 days **

Circular saw blade HM 160 x 2.2/1.6 x 20 mm, Z=48

Coated plates | tear-free | alternating tooth

€54.12 *
FR-FR06L001H

Delivery time 1 - 2 days **

Circular saw blade HM 165 x 1.8/1.2 x 20 mm, Z=48

Coated plates | tear-free | alternating tooth

€51.32 *
FR-FR07L002HC

Delivery time 1 - 2 days **

Circular saw blade HM 165 x 2.6/1.6 x 20 mm, Z=48

Coated plates | tear-free | alternating tooth

€56.18 *
FR-FR07L001H

Delivery time 1 - 2 days **

Circular saw blade HM 185 x 2.4/1.6 x 20 mm, Z=60

Coated plates | tear-free | alternating tooth

€60.12 *
FR-FR12L001H

Delivery time 1 - 2 days **

Circular saw blade HM 190 x 2.5/1.8 x 30 mm, Z=48

Circular saw blade HM - tear-free cu
t
- for hand and plunge circular saws - for all types of wood

for rip and cross cuts - extremely fine cut quality
190 x 2.5/1.8 x 30 mm, Z=48 WZS

€89.99 *
FR-LU3A-0002

Delivery time 1 - 2 days **

Circular saw blade HM 190 x 2.1/1.4 x 30 mm, Z=60

Coated plates | tear-free | alternating tooth

€65.14 *
FR-FR13L002HC

Delivery time 1 - 2 days **

Circular saw blade HM 190 x 2.6/1.6 x 30 mm, Z=60

Coated plates | tear-free | alternating tooth

€65.33 *
FR-FR13L001H

Delivery time 1 - 2 days **

Circular saw blade HM 200 x 3.2/2.2 x 30 mm, Z=64

Circular saw blade HM - tear-free cut in combination with a scorer - for double-sided besch. Boards & laminate
for cross-sections - extremely fine cut quality
200 x 3,2/2,2 x 30mm, Z=64 TFZ

€78.61 *
FR-LU3D-0100

Delivery time 1 - 2 days **

Circular saw blade HM 200 x 2.8/1,8 x 30 mm, Z= 48

Circular saw blade HM - tear-free cut without scorer
for boards coated on both sides
200 x 2.8/1,8 x 30 mm, Z= 48 DHZ-P

€112.59 *
K-111600-200-010

Delivery time 1 - 2 days **

Circular saw blade HM 200 x 2.5/1.8 x 30 mm, Z=64

Coated plates | tear-free | alternating tooth

€69.56 *
FR-FR14L001T

Delivery time 1 - 2 days **

Circular saw blade HM 210 x 2.5/1.8 x 30 mm, Z=54

Circular saw blade HM - tear-free cu
t
- for hand and plunge circular saws - for all types of wood

for rip and cross cuts - extremely fine cut quality
210 x 2.5/1.8 x 30 mm, Z=54 WZS

€94.96 *
FR-LU3A-0003

Delivery time 1 - 2 days **

Circular saw blade HM 210 x 2.8/1,8 x 30 mm, Z= 48

Circular saw blade HM - tear-free cut without scorer
for boards coated on both sides
210 x 2.8/1,8 x 30 mm, Z= 48 DHZ-P

€113.79 *
K-111600-210-010

Delivery time 1 - 2 days **

Circular saw blade HM 210 x 2.1/1.4 x 30 mm, Z=66

Coated plates | tear-free | alternating tooth

€73.90 *
FR-FR15L001TC

Delivery time 1 - 2 days **

Circular saw blade HM 216 x 2.1/1.4 x 30 mm, Z=66

Coated plates | tear-free | alternating tooth

€70.97 *
FR-FR16L001TC

Delivery time 1 - 2 days **

Circular saw blade HM 220 x 3.2/2.2 x 30 mm, Z=42

Circular saw blade HM - tear-free cut without scorer - up to one-sided coated panels
for cross-sections - extremely fine cut quality
220 x 3.2/2.2 x 30mm, Z=42 HDF

€87.43 *
FR-LU3B-0100

Delivery time 1 - 2 days **

Circular saw blade HM 220 x 3,2/2,2 x 30 mm, Z=64

Circular saw blade HM - tear-free cut without scorer - also in panels coated on both sides
for cross-sections - extremely fine cut quality
220 x 3,2/2,2 x 30mm, Z=64 WZ neg.

€98.60 *
FR-LU3A-0100

Delivery time 1 - 2 days **

Circular saw blade HM 220 x 3.2/2.2 x 30 mm, Z=42

Circular saw blade HM - tear-free cut without scorer - for double-sided (abrasive) coated boards & laminate
for cross-sections - extremely fine cut quality
220- x 3,2/2,2 x 30mm, Z=42 HDF neg.

€90.81 *
FR-LU3C-0100

Delivery time 1 - 2 days **

Circular saw blade HM 220 x 3,2/2,2 x 30 mm, Z=64

Circular saw blade HM - tear-free cut in combination with a scorer - for double-sided besch. Boards & laminate
for cross-sections - extremely fine cut quality
220 x 3,2/2,2 x 30mm, Z=64 TFZ

€84.72 *
FR-LU3D-0200

Delivery time 1 - 2 days **

Circular saw blade HM 220 x 2.9/2.0 x 30 mm, Z= 48

Circular saw blade HM - tear-free cut without scorer
for boards coated on both sides
220 x 2.9/2.0 x 30 mm, Z= 48 HTT-P

€124.20 *
K-111604-220-010

Delivery time 1 - 2 days **

Special saw blade 225x2,6x30 TF64

Special saw blade 225x2,6x30 TF64 | Suitable for: CS 70

€189.69 *
F-489459

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 3.2/2.2 x 30 mm, Z=80

Circular saw blade HM - tear-free cut without scorer - also in panels coated on both sides
for cross-sections - extremely fine cut quality
250 x 3,2/2,2 x 30mm, Z=80 WZ neg.

€109.80 *
FR-LU3A-0200

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 3.2/2.2 x 30 mm, Z=48

Circular saw blade HM - tear-free cut without scorer - up to one-sided coated panels
for cross-sections - extremely fine cut quality
250 x 3.2/2.2 x 30mm, Z=48 DHZ

€102.33 *
FR-LU3B-0200

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 3.2/2.2 x 30 mm, Z=80

Circular saw blade HM - tear-free cut in combination with a scorer - for double-sided besch. Boards & laminate
for cross-sections - extremely fine cut quality
250 x 3.2/2.2 x 30 mm, Z=80 TFZ

€95.20 *
FR-LU3D-0400

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 3.2/2.2 x 30 mm, Z=48

Circular saw blade HM - tear-free cut without scorer - for double-sided (abrasive) coated boards & laminate
for cross-sections - extremely fine cut quality
250- x 3,2/2,2 x 30mm, Z=48- TFZ neg.

€102.33 *
FR-LU3C-0200

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 3.2/2.2 x 30 mm, Z=60

Circular saw blade HM - tear-free cut in combination with a scorer - for double-sided besch. Boards & laminate
for cross-sections - extremely fine cut quality
250 x 3,2/2,2 x 30mm, Z=60 TFZ

€88.35 *
FR-LU3D-1100

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 3.2/2.2 x 30 mm, Z= 48

Circular saw blade HM - tear-free cut without scorer
for boards coated on both sides
250 x 3.2/2.2 x 30 mm, Z= 48 DHZ-N

€151.74 *
K-111602-250-010

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 3.2/2.2 x 30 mm, Z= 80

Circular saw blade HM - very smooth tear-free cut without scorer
for crosscutting wooden profiles, coated ledges and door frames
250 x 3.2/2.2 x 30 mm, Z= 80 HTT-P

€155.75 *
K-111615-250-010

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 2.9/2.0 x 30 mm, Z= 60

Circular saw blade HM - tear-free cut without scorer
for boards coated on both sides
250 x 2.9/2.0 x 30 mm, Z= 60 HTT-P

€182.20 *
K-111604-250-010

Delivery time 1 - 2 days **

Circular saw blade HM 250 x 2.8/1.8 x 30 mm, Z=80

Coated plates | tear-free | alternating tooth

€98.41 *
FR-FR23L001T

Delivery time 1 - 2 days **

Special saw blade 260x2,5x30 WZ/FA64

Festool Circular saw blade LAMINATE/HPL HW 260x2,5x30 WZ/FA 64 | For: KS 120 and KS 88

€192.97 *
F-494606

Delivery time 1 - 2 days **

Circular saw blade HM 300 x 3.2/2.2 x 30 mm, Z=96

Circular saw blade HM - tear-free cut without scorer - also in panels coated on both sides
for cross-sections - extremely fine cut quality
300 x 3,2/2,2 x 30mm, Z=96 WZ

€130.80 *
FR-LU3A-0300

Delivery time 1 - 2 days **

Circular saw blade HM 300 x 3.2/2.2 x 30 mm, Z=96

Circular saw blade HM - tear-free cut in combination with a scorer - for double-sided besch. Boards & laminate
for cross-sections - extremely fine cut quality
300 x 3,2/2,2 x 30mm, Z=96 TFZ

€114.51 *
FR-LU3D-0600

Delivery time 1 - 2 days **

1 From 2