NEW. INNOVATIVE. PROFESSIONAL.
 MO. - FR. 08:30 - 12:30 HRS / 14:00 - 17:30 HRS

The right circular saw blade for every type of saw.

There are circular saw types that are mostly or exclusively used for certain materials. Think, for example, of the rocker saw (solid wood) or the panel saw (wood-based panels). For such applications, but also for sawing highly abrasive materials, the use of a saw blade designed for this purpose is highly recommended, in some cases even indispensable. Many circular saws, on the other hand, are used for a whole range of materials, some of them very different.

The choice of saw blade by size

When choosing a circular saw blade, it is therefore important to consider not only the application but also the size of the saw blade, which varies not only according to the design of the saw (hand-held circular saw, table saw, mitre saw) but often also from model to model. Buying a saw blade with the wrong diameter, wrong dimension of the centre hole or wrong side holes can make it impossible to clamp the blade and in the worst case even lead to damage to the blade and the circular saw. Before ordering, find out about the appropriate sizes in the operating instructions for your circular saw, and feel free to contact our expert advisors if you have any questions or uncertainties.

You can find more detailed information on choosing the right saw blade in the FAQ section in the Circular saw blade category.

Special feature: thin-cutting saw blades.

A special mention should be made here of thin-cut saw blades. The small cutting width of these blades make them a good choice for battery-powered hand-held circular saws, whose motor power usually does not match that of corded machines. The low cutting pressure during sawing and the resulting lighter running behaviour accommodate this lower power.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 17
No results were found for the filter!
€84.35 *
F-205765

Delivery time 1 - 2 days **

€67.72 *
F-205764

Delivery time 1 - 2 days **

€59.17 *
F-205763

Delivery time 1 - 2 days **

NEW
Circular saw blade HM 210 x 3.2/2.2 x 30 mm, Z=24

Circular saw blade HM for rip cuts
rough cut quality
210 x 3.2/2.2 x 30 mm, Z=24

€62.88 *
FR-LU2A-1000

Delivery time 1 - 2 days **

Scoring saw blade HM 120 x 3,1-4,3/2,2 x 22 mm,...

Scoring circular saw blade - scoring saw blade HM
120 x 3.1 - 4.3 - 2.2 x 22 mm Z=24

€38.45 *
FR-LI25M-31EB3

Delivery time 1 - 2 days **

Scoring saw blade HM 80 x 2.8-3.6 x 20 mm, Z=12+12

Scoring saw blade HM - tooth width variably adjustable - for laminate and veneer
80 x 2.8-3.6 x 20 mm, Z12+12 WZ

€92.32 *
FR-LI16M-GA3

Delivery time 1 - 2 days **

Scoring saw blade HM 100 x 3,1-4,2/2,2 x 20 mm,...

Scoring circular saw blade - scoring saw blade HM
100 x 3.1 - 4.2 - 2.2 x 20 mm Z=24

€43.22 *
FR-LI25M-31BA3

Delivery time 1 - 2 days **

Scoring saw blade HM 100 x 3,1-4,3/2,2 x 22 mm,...

Scoring circular saw blade - scoring saw blade HM
100 x 3.1 - 4.3 - 2.2 x 22 mm Z=24

€44.91 *
FR-LI25M-31BB3

Delivery time 1 - 2 days **

Slot Routing Cutter HM 100 x 4 x 22 mm, Z=6

for flatfräsendowels, not for original lamella loggers
100 x 4 x 22 mm, Z6

€34.90 *
FR-FI02M-BX3P

Delivery time 1 - 2 days **

Grooving Cutter for Biscuit Joiners

Compatable with Lamello machines | Replaceable blades
100 x 4 x 22 mm, Z4, V4

€168.86 *
FR-TG13M-AA3

Delivery time 1 - 2 days **

HM-scoring circular saw blade 2-piece
Freud scoring saw blade
D 100 x 2.8-3.6 x 20 mm / Z 12+12
€97.18 *
FR-LI16M-BA3

Delivery time 1 - 2 days **

HM-scoring circular saw blade 2-piece
Freud scoring saw blade
D 100 x 2.8-3.6 x 22 mm / Z 12+12
€97.18 *
FR-LI16M-BB3

Delivery time 1 - 2 days **

Resin gall cutter HM 100 x 8 x 22 mm, Z=4

Resin bite milling cutter HM - also for - original lamello devices
100 x 8 x 22 mm, Z4

€164.90 *
FR-FI22M-AB3P

Delivery from 16.05.2024

Circular saw blade HM 100 x 2.6/1.6 x 22/20 mm,...

Circular saw blade HM - for chipboard & plastics - AI161
100 x 2.6/1.6 x 22/20 mm, Z= 30 WZ

€63.22 *
K-111400-100-020

Delivery time 1 - 2 days **

Circular saw blade HM 100 x 3.97/2.8 x 22 mm,...

Circular saw blade HM - for wood, wood-based material & plastics - for flat dowels and original lamello devices
100 x 3.97/2.8 x 22 mm, Z= 12 WZ

€43.04 *
K-111400-100-040

Delivery time 1 - 2 days **

Lamello cutter HM 100 x 4 x 22 mm, Z=2+4
especially suitable for original lamello devices
100 x 4 x 22 mm, Z=2+4
€68.33 *
KLE-AH100-20622

Delivery time 1 - 2 days **

Scoring saw blade HM 120 x 3,1-4,2/2,2 x 20 mm,...

Scoring circular saw blade - scoring saw blade HM
120 x 3.1 - 4.2 - 2.2 x 20 mm Z=24

€49.77 *
FR-LI25M-31EA3

Delivery time 1 - 2 days **

Scoring saw blade HM 120 x 2.8-3.6 x 20 mm,...

Scoring saw blade HM - tooth width variably adjustable - for laminate and veneer
120 x 2.8-3.6 x 20 mm, Z=12+12 WZ

€92.32 *
FR-LI16M-AA3

Delivery time 1 - 2 days **

Scoring saw blade HM 120 x 2.8-3.6 x 22 mm,...

Scoring saw blade HM - tooth width variably adjustable - for laminate and veneer
120 x 2.8-3.6 x 22 mm, Z=12+12 WZ

€92.32 *
FR-LI16M-AB3

Delivery time 1 - 2 days **

Circular saw blade HM 120 x 2.4/1.4 x 22 mm, Z= 24

Circular saw blade HM - for wood, wood-based material & plastics - for flat dowels and original lamello devices
120 x 2.4/1.4 x 22 mm, Z= 24 WZ

€56.28 *
K-111400-120-010

Delivery time 1 Working day

Circular saw blade HM 120 x 1.8/1.2 x 20 mm, Z=40

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials
120 x 1.8/1.2 x 20 mm, Z=40 TFF-P

€71.00 *
K-111430-120-010

Delivery time 1 - 2 days **

MAFELL circular saw blade, 120x1.8/1.2x20, Z=24

Circular saw blade HM for all types of wood
Longitudinal and cross sections | Universal use | Alternating tooth

€40.46 *
MAF-092558

Delivery time 1 - 2 days **

MAFELL circular saw blade, 120x1.8/1.2x20, Z=40

Circular saw blade HM for all types of wood
Cross sections in wood | fine-cut blade | flat/trapezoidal tooth

€64.26 *
MAF-092559

Delivery time 3 Workdays

MAFELL circular saw blade, 120x1.8/1.2x20, Z=12

Circular saw blade HM for all types of wood
Longitudinal cuts in wood | ripping cuts | alternate tooth

€29.75 *
MAF-092560

Delivery time 3 Workdays

MAFELL circular saw blade, 120x1.8/1.2x20, Z=40

Circular saw blade HM for laminate
Abrasive materials | Special blade | Trapezoidal tooth

€64.26 *
MAF-092578

Delivery time 1 - 2 days **

Circular saw blade HM 125 x 2.4/1.6 x 20 mm, Z=24

Circular saw blade HM for all types of wood
for rip and cross cuts - medium cutting quality
125 x 2.4/1.6 x 20 mm, Z=24 WZ

€34.34 *
FR-LP30M001

Delivery time 1 - 2 days **

Circular saw blade HM 125 x 2.6/1.6 x 20/12.7...

Circular saw blade HM - for chipboard & plastics
125 x 2.6/1.6 x 20/12.7 mm, Z= 36 WZ

€51.66 *
K-111400-125-020

Delivery time 1 - 2 days **

Circular saw blade HM 130 x 2.6/1.6 x 20/16 mm,...

Circular saw blade HM - for chipboard & plastics
130 x 2.6/1.6 x 20/16 mm, Z= 36 WZ

€51.66 *
K-111400-130-020

Delivery time 1 - 2 days **

Circular saw blade HM 136 x 1.7/1.0 x 10 mm, Z=24

Circular saw blade HM for Cordlesscircular hand saws - for wood
for rip and cross cuts - medium cut quality
136 x 1,7/1,0 x 10mm, Z=24 WZ

€24.76 * €17.35 *
T-CSB-13624T

Delivery time 1 - 2 days **

Circular saw blade HM 136 x 1.8/1.2 x 20/10 mm,...

Circular saw blade HM - for wood, wood-based material & plastics - thin-cut
136 x 1.8/1.2 x 20/10 mm, Z= 14 WZ

€45.43 *
K-111425-136-010

Delivery time 1 - 2 days **

Circular saw blade HM 136 x 2.0/1.4 x 20/10 mm,...

Circular saw blade HM - "Brutal disposable"
for sawing "almost" any material
136 x 2.0/1.4 x 20/10 mm, Z= 16 WZ

€33.31 *
K-108055-136-010

Delivery time 1 - 2 days **

Circular saw blade HM 136 x 2.0/1.4 x 20/10 mm,...

Circular saw blade HM - "Brutal disposable - also for angle grinders"
136 x 2.0/1.4 x 20/10 mm, Z= 40 WZ

€66.16 *
K-108055-136-030

Delivery time 1 - 2 days **

Circular saw blade HM 136 x 1.6/1.2 x 20/10 mm,...

Circular saw blade HM - especially for stainless steel
Dry-Cutter - dry cut
136 x 1.6/1.2 x 20/10mm, Z=36 WWF

€57.49 *
K-107300-136-010

Delivery time 1 - 2 days **

Circular saw blade HM 136 x 1.6/1.0 x 20 mm, Z=48

Non-ferrous metals | plastic | trapezoidal flat tooth

€52.09 *
FR-FR03A001HC

Delivery time 1 - 2 days **

Circular saw blade HM 140 x 2.6/1.6 x 20 mm, Z= 36

Circular saw blade HM - for chipboard & plastics
140 x 2.6/1.6 x 20 mm, Z= 36 WZ

€56.42 *
K-111400-140-030

Delivery time 1 - 2 days **

Circular saw blade HM 140 x 1.8/1.3 x 20 mm, Z=48

Non-ferrous metals | plastic | trapezoidal flat tooth

€52.62 *
FR-FR04A002HC

Delivery time 1 - 2 days **

1 From 17