Roughing Cutter Carbide DIA® PERFORMANCE

Our right-hand twist roughing cutters are equipped with innovative, friction-avoiding, high-performance diamond coating. The DIA® PERFORMANCE roughing cutters withstand the highest demands. In addition to machining softwood and hardwood, the roughing cutter is suitable for mineral materials and plastic materials. The roughing cutters are equipped with a mechanical feed.

Right-hand rotation / right-hand twist: Chip removal upwards.

Right-hand feed / left-hand twist: Good chip removal downwards.

D= diameter | GL= total length | NL= effective length

More Information

D=8 mm | W=30 mm | L=60 mm | clockwise rotation | right twist | DIA-® PERFORMANCE.

EUR 111.17 *

KLE-T344-080-RKD

D: 8 mm | NL: 35 mm | GL: 80 mm | Z: 3 | Right-hand twist

EUR 101.42 *

KLE-T144-081-RKD

D=10 mm | W=35 mm | L=80 mm | clockwise rotation | right twist | DIA-® PERFORMANCE.

EUR 125.43 *

KLE-T344-100-RKD

D: 10 mm | NL: 45 mm | GL: 100 mm | Z: 3 | Right-hand twist

EUR 111.75 *

KLE-T144-101-RKD

D: 12 mm | NL: 45 mm | GL: 100 mm | Z: 3 | Right-hand twist

EUR 189.36 *

KLE-T144-121-RKD

Advantages of DIA® PERFORMANCE roughing cutters

Tool life 4-5 x higher than solid carbide
Right-hand twist for clean groove base
Spiral cutting edges upwards for fast cutting action
Excellent end milling results
Better chip clearance
Low coefficient of friction for low working temperature
Machining of aluminium and plastic materials without lubricant

Excellent results on the following materials:

Hardwood and softwood
Minerals (CORIAN ...)
Plastics (acrylics, Plexiglas, HDPE)
Composite materials (HPL, AluDibond, Trespa ...)