Our experts are here for you!
+49 (0) 8152 92898-0
info@sautershop.com
FESTOOL - all Festool articles
Drilling and Screwdriving CENTROTEC tool range

Festool CENTROTEC tool range

CENTROTEC bits and bit accessories
CENTROTEC Drilling & Countersinking
CENTROTEC Forstner drills
CENTROTEC wood twist drills
CENTROTEC HSS twist drills
CENTROTEC adapter for sockets
CENTROTEC Systainer
FAQ, Videos and more

For your Festool impact drill or cordless screwdriver, we offer you the best accessories to get the most out of your tool. Here you will find the full range of accessories and tool inserts under the collective term Centrotec for your Festool tool, from drills to bits to more specific accessory products.

FAQ Video

64 Article found

Guide to the Festool centrotec chuck system

Benefits of the Centrotec system and how it works with your standard 1/4 inch bits.

Frequently asked questions about Festool CENTROTEC tool range

  • 1. What is so special about CENTROTEC?

    CENTROTEC is the alternative to the classic drill chuck. Stationary or on the construction site, your work steps require constant attachment changes. If you add up the time you spend changing tools, it adds up to numerous hours in the course of a working week. To work more economically, we recommend the Festool tool range.

    With CENTROTEC, you noticeably reduce the time and effort required for tool changes. Power transmission, smart tool change, order and clear structures, and all this with outstanding quality.

  • 2. What advantages does CENTROTEC offer?

    Simply changing tools is not enough on the construction site or in the workshop. As usual, a lot of time is lost looking for exactly the drill, bit or forstner that you put down "right there". The time you spend searching and changing is better used differently. You need a well thought-out tool assortment including a Systainer and Sortainer. Festool offers it! The tool range has a technology that effectively saves time, avoids frustration and makes tool changes controllable and comprehensible.

    With the matching Systainer for storing the CENTROTEC tool range, you bring order and system to the point with a box. Your working day is clearly laid out. The hexagon socket prevents drill bits from spinning. Moreover, you are not forced to clamp the tools.

  • 3. How does CENTROTEC work?

    CENTROTEC is a quick-change tool system. It is half the size of a normal drill chuck and 80% lighter which also saves energy. You attach the quick-change chuck to the central axis of your machine, the FastFix interface. The chuck allows an ultra-fast change within the CENTROTEC tool range. Pull back the green ring and exchange the tool. The tools have an external hexagon. The tool holder in the chuck with internal hexagon transmits the force safely and without loss. Incorrect clamping or slipping of the tool is prevented by the use of CENTROTEC.

    There are two ways to work with the chuck:

    1. The most common method is to release the clamped tool in the quick-change chuck by pulling back the green ring. Then you insert the required tool. The change is quick and you are extremely flexible in the use of your small electric tools.
       
    2. The alternative is to use several of the same attachments so that you do not have to change the tools. In this case, you switch between the quick-change chucks including the tool that is already clamped in place. This can be useful if you want to be sure not to have to permanently change the same tool between the different attachments. Another advantage is that the search for the replaced tool is over.

  • 4. Which CENTROTEC attachments doeas the manufacturer Festool offer?

    • Tool chuck WH-CE CENTROTEC:  For all Festool cordless screwdrivers and drills with CENTROTEC interface (except DR20 / DRP20).
    • Angle attachment DD-AS:  For all Festool cordless and T- cordless drill/drivers with FastFix attachment (except CXS/TXS).
    • Eccentric attachment DD-ES:  For all Festool C- and T- cordless drill bits with FastFix attachment (except CXS/TXS).
    • Depth stop DD-DC:  For all Festool C and T cordless drill drivers with FastFix attachment (except CXS/TXS).
    • Keyless drill chuck KC 13-1/2-MMFP:  For all Festool cordless drill drivers, cordless impact drill drivers, drills (except DR20 / DRP20) and impact drills with CENTROTEC interface.
    • Keyless drill chuck KC 13-1/2-K-FFP:  For all Festool cordless drill drivers, cordless impact drill drivers, drills (except DR20 / DRP20) and impact drills with CENTROTEC interface.
    • Magnetic bit holder BH 60 CE-Imp:  For all Festool cordless drill/drivers with FastFix interface.

  • 5. Which tools are suitable for CENTROTEC?

    • The WH-CE CENTROTEC tool chuck is suitable for all Festool cordless drill drivers and drilling machines with CENTROTEC interface (except DR20 / DRP20)
    • The quick-action drill chucks KC 13-1/2-MMFP and KC 13-1/2-FFP are suitable for all Festool cordless drill drivers, cordless impact drill drivers, drills (except DR20 / DRP20) and impact drills with CENTROTEC interface