NEW. INNOVATIVE. PROFESSIONAL.
 MO. - FR. 08:30 - 12:30 HRS / 14:00 - 17:30 HRS

High-quality cuts with the Kreg guide rail

Precise cuts can be achieved with your circular saw in combination with the Rip Cut edge guide and the Accu Cut guide system. Both guide rails from Kreg can be used to achieve straight, accurate Perform longitudinal and cross cuts without tearing in plywood, MDF and other large boards.

Accu Cut and Rip Cut

The Accu Cut guide rail is for longitudinal and cross sections as well as angled cuts (up to 1,220 mm). Thanks to the non-slip guide strips, you fix the guide rail in place without any clamps. The Accu Cut guides your circular saw along an aluminum bar that allows a straight-line saw guide.

The Rip Cut guide rail is for longitudinal and cross sections (up to 610 mm). The oversized edge guide allows accurate handling over the entire cut. The universal carriage is suitable for the most common saws with left saw blade.

Kreg guide rail

Close filters
 
  •  
from to
No results were found for the filter!
KREG® Straight Edge Guide Extension

Extends the Straight Edge Guide by 61cm

€35.69 *
KR-KMA4600

Delivery time 1 - 2 days **

KREG® Straight Edge Guide

Perfect for straight cuts and routing

Easy operation | Easy alignment | Simple non-slip

.
€79.72 *
KR-KMA4500

Delivery time 1 - 2 days **

KREG® Straight Edge Guide XL

Easy operation | Easy alignment | Simple non-slip

€134.46 *
KR-KMA4700

Delivery time 1 - 2 days **

Saw guide Rip cut metric

Cutting length: 610 mm

€60.68 *
KR-KMA2685-INT

Delivery time 1 - 2 days **

€112.00 *
KR-KMA2700

Delivery time 1 - 2 days **

Extension set for the Accu-Cut

Cutting length: 1346 mm (2x 673 mm)

€130.89 *
KR-KMA2750

Delivery time 1 - 2 days **

Kreg Profile clamps

for the Kreg guide rail Accu-Cut

€29.74 *
KR-KMS7520

Delivery time 1 - 2 days **