Guide rails with practical accessories from Triton
Triton offers guide rails in the lengths 700mm and 1500mm to match its circular plunge saws, routers and jigsaws. These rails can be easily connected and extended by means of rail connectors. For accurate cuts with a hand circular saw and a guide rail a good fixation of the rail is essential. Although the attached rubber pads hold quite well, so that the rail does not slip so easily, but especially with long cuts something can go wrong. Once the suction hose gets stuck for a short time and the rail slips.
The solution: Triton clamp TTSWC. The advantage of the guide rail clamps is that they do not require any space to the front. Triton clamps can also be used in T-slot rails from Incra, Aweso and Sauter. They also fit into the grooves of the Festool MFT/3 and CMS routing fence.
Compatible YouTool guide rails
YouTool universal guide rails are compatible with Bosch devices. Therefore you will find them in this category as well.