Chamfer Trimming Cutters with Bearing 12 mm

You can easily break workpiece edges with a chamfer routing cutter. As a rule, 45° bevel cutters are suitable for simple edge breaking. For optical reasons other angles can also be used should be considered. These routing cutters are supplied with a thrust ball bearing and are carbide tipped (HM).
The imaginary reference line for the angle is parallel to the shaft.

W = angle | D = diameter | NL = effective length | S = shank 12 mm | SL = shank length

A: 15° l D: 30 mm l NL1: 35 mm l GL: 75 mm l d: 12.7 mm l S: 12 mm

EUR 130.17 *

TI-BC15-12

A: 15° l D: 30 mm l NL1: 35 mm l GL: 75 mm l d: 12.7 mm l S: 12 mm | with starting ball bearing

EUR 136.08 *

TI-BCB15-12

A: 30° l D: 65 mm l L1: 15 mm | L2: 21 mm | d: 12.7 mm lProfessional

EUR 166.91 *

TI-RPC30L-12

Chamfer bit | bearing | D44 | H67 | h18.5 | A12

EUR 64.34 *

FR-40-11412P

E 45 ° | D 36 mm | NL 11,6 mm | S 12 mm | SL 40 mm

EUR 56.28 *

E-13766

E 45 ° | D 44,5 mm | NL 15,9 mm | S 12 mm | SL 40 mm

EUR 66.09 *

E-13840

E 45 ° | D 50,8 mm | NL 19 mm | S 12 mm | SL 40 mm

EUR 81.69 *

E-13842

E 45 ° | D 57,2 mm | NL 22,2 mm | S 12 mm | SL 40 mm

EUR 92.72 *

E-13844

E: 45° | D: 60.5 mm | B: 25 mm | L: 74 mm

EUR 107.16 *

KLE-E151-635-R

Chamfer bit | bearing | D62.1 | H74 | h25.5 | A12

EUR 128.03 *

FR-40-11812P