NEW. INNOVATIVE. PROFESSIONAL.
 MO. - FR. 08:30 - 12:30 HRS / 14:00 - 17:30 HRS

The flush routing cutter - the tool for edge processing

Clean routing of protruding edges is possible with the flush routing cutter, which belongs to the group of wood routing cutters.

Cutter attachment in various designs

Among the flush routing cutters there are 2- or 3-edged routing cutters, as well as routing cutter attachments with and without ball bearings, whereby the thrust bearing can be mounted on the shank side or as standard. Flush routing cutter with Exchangeable plates have screwed-on knives which are ground on both sides. This has the advantage that the blade can be turned and the routing cutter is immediately fully operational again. If both sides are used up, the entire cutter does not have to be replaced or sharpened, but only new blades, i.e. replacement blades, have to be purchased.

routing cutters with an axis angle perfectly remove any edge overhangs that may occur, for example, when gluing the edge. The axially negatively inclined knives change the cut to a pulling cut so that much better results can be achieved when cutting plastics or long-fibre woods.

Choosing the right size

When selecting the flush routing cutter, pay attention to the correct shank diameter, 8 mm and 12 mm being the most common sizes. Here you will find all flush routing cutters with 12 mm shank. Further important data are the diameter, the shaft length and the the useful length. The individual dimensions are illustrated in the respective categories.

Close filters
 
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
Trimming Router Cutter

Trimming Router Cutter HW (HM) Z3 with ball bearing
D: 12.7 mm- l - NL: 12.7 mm- l - GL: 55 mm- l - SL: 32 mm

€31.39 *
E-13500

Delivery time 1 - 2 days **

Trimming Router Cutter

Trimming Router Cutter HW (HM) Z3 with ball bearing
D: 12,7 mm- l- NL: 25,4 mm- l - GL: 68 mm- l - SL 32 mm

€34.88 *
E-13502

Delivery time 1 - 2 days **

Trimming Router Cutter with axle angle

Trimming Router Cutter HW (HM) with axis angle
D: 12,7 mm- l - NL: 25,4 mm- l- SL: 32 mm

€39.17 *
E-13460

Delivery time 1 - 2 days **

Trimming Router Cutter WPL

Reversable Blades Trimming Router Cutter with ball bearing
D: 19 mm- l - NL: 30 mm- l- GL: 69 mm- l- - S: 8 mm

€123.50 *
E-20321

Delivery time 1 - 2 days **

Trimming Router Cutter with undercut

Trimming Router Cutter , ball bearing schafton the side
NL (C): 38,1 mm- l- - KL (B):- 16 mm- l - A: 93-°

€78.94 *
T-TR38X8MMTC

Delivery from 14.09.2021

Double-Trimming Router Cutter HW (HM) Z=2+2

D:- 18 mm- l- NL1:- 10 mm- l- NL2: 14 mm- l- GL:- 72 mm- l- S:- 8 mm

€101.30 *
TI-DBGT90-8

Delivery time 1 - 2 days **

Double-Trimming Router Cutter HW (HM) Z=2+2

D: 18 mm | NL1: 10 mm | NL2: 14 mm | GL: 72 mm | S: 8 mm

€160.89 *
TI-DBGT90-8RT

Delivery time 1 - 2 days **

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 16 mm l NL 12 mm l GL 55 mm l SL 30 mm

€108.50 *
E-20294

Delivery time 1 - 2 days **

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 16 mm l NL 30 mm l GL 572 mm l SL 30 mm

€129.90 *
E-20295

Delivery from 22.09.2021

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 22 mm l NL 12 mm l GL 55 mm l SL 30 mm

€112.50 *
E-20296

Delivery time 1 - 2 days **

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 22 mm l NL 30 mm l GL 72 mm l SL 30 mm

€142.50 *
E-20297

Delivery time 1 - 2 days **

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 19 mm l NL 40 mm l GL 82 mm l SL 30 mm

€123.90 *
E-20298

Delivery time 1 - 2 days **

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 16 mm l NL 29.5 mm l GL 68 mm l SL 30 mm

€134.90 *
E-20323

Delivery time 1 - 2 days **

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 16 mm l NL 50 mm l GL 90 mm l SL 30 mm

€186.90 *
E-20326

Delivery time 1 - 2 days **

NEW
Reversible blades flush routing cutter with...

S: 8 mm l D 19 mm l NL 49.5 mm l GL 90 mm l SL 30 mm

€179.90 *
E-20328

Delivery time 1 - 2 days **

Copy cutter HW for curved joining

D:- 10 mm- l- NL: 25 mm- l- SL: 32 mm- l- GL: 65 mm-

€48.49 *
E-11661

Delivery time 1 - 2 days **

Trimming Router Cutter HW (HM) with ball bearing

D: 6 mm l NL: 19 mm l GL: 64 mm l SL: 32 mm

€35.18 *
E-13579

Delivery time 1 - 2 days **

Trimming Router Cutter HW

D: 12.7 mm l NL: 19 mm l SL: 32 mm l GL: 55 mm

€46.84 *
E-11651

Delivery time 1 - 2 days **

Flush routing cutter KL on shank Ø12.7 mm incl....

D: 12.7 mm | NL: 19 mm | S: 6 mm incl. reducing sleeve 8 to 6 mm

.
€59.90 *
TI-PGC12719-8H

Delivery time 1 - 2 days **

WPL Trimming Router CutterZ2

Reversable Blades - Trimming Router Cutter Z2
D:19 mm- l - NL: 12 mm- l- S: 8 mm-

€56.60 *
I-F043-19081

Delivery time 1 - 2 days **

WPL Trimming Router CutterZ2

HW-Slot Routing Cutter with exchangeable plate and ball bearing at the schaftside
D: 19 mm- l- NL: 28,3 mm- l - GL:- 69 mm- l- SL: 37 mm

€94.27 *
I-F045-19381

Delivery time 1 - 2 days **

Spiral groove-Trimming Router Cutter with 2...

Spiral groove - Trimming Router Cutter- Z2 - right-handSolid Carbide twist
D: 10 mm- l - NL: 25 mm- l - GL:- 76 mm- l- SL: 32 mm-

€105.28 *
E-13490

Delivery time 1 - 2 days **

Trimming Router Cutter HW (HM)

D: 6.35 mm l NL: 12.7 mm l SL: 40 mm

€30.29 *
T-TR23X8MMTC

Delivery time 1 - 2 days **

Trimming Router Cutter HW

D: 12.7 mm l NL: 25 mm l SL: 32 mm l GL: 62 mm

€48.02 *
E-11653

Delivery time 1 - 2 days **

Trimming Router Cutter HW

D: 16 mm l NL: 19 mm l SL: 32 mm

€40.97 *
T-C121AX8MMTC

Delivery time 1 - 2 days **

Trimming Router Cutter HW (HM)

D: 6.35 mm l NL: 25.4 mm l SL: 32 mm

€26.11 *
T-C168X8MMTC

Delivery time 1 - 2 days **

Trimming Router Cutter HW

D: 16 mm l NL: 19 mm l SL: 32 mm l GL: 56 mm

€53.68 *
E-11654

Delivery time 1 - 2 days **

Fase-Trimming Router Cutter

E: 30° l D: 12.7 mm l NL: 12.7 mm l S: 8 mm l SL: 32 mm

€26.31 *
E-13662

Delivery time 1 - 2 days **

WPL Flush Routing Cutter Z2 22 x 20 S8

Blades for flush routing with ball bearing
D: 22 mm- l - NL: 20 mm- l- - GL:- 60 mm- l- S: 8 mm

€142.30 *
E-20320

Delivery time 1 - 2 days **

WPL Trimming Router CutterZ2

Reversable Blades - Trimming Router Cutter- Z2
D: 19 mm- l - NL: 30 mm- l - S:- 8 mm-

€63.44 *
I-F043-19381

Delivery time 1 - 2 days **

Trimming Router Cutter with 2 ball bearings and...

Trimming Router Cutter with 2 ball bearings and axle bracket
D:- 16 mm- l - NL:- 25,4 mm- l - SL: 32 mm

€50.44 *
E-13470

Delivery time 1 - 2 days **

Trimming Router Cutter HW (HM) with ball bearing

D: 9.5 mm l NL: 12.7 mm l GL: 55 mm l SL: 32 mm

€28.57 *
E-13580

Delivery time 1 - 2 days **

Trimming Router Cutter HW

D: 16 mm l NL: 25 mm l SL: 32 mm l GL: 62 mm

€56.63 *
E-11656

orderable, delivery week 42

Fase-Trimming Router Cutter

E: 45° l D: 12.7 mm l NL: 12.7 mm l S: 8 mm l SL:32 mm

€26.31 *
E-13664

Delivery time 1 - 2 days **

Trimming Router Cutter HW

D: 16 mm l NL: 32 mm l SL: 32 mm l GL: 77 mm

€56.63 *
E-11657

orderable, delivery week 42

Trimming Router Cutter

D: 9.5 mm l NL: 12.7 mm l SL: 32 mm

€29.37 *
T-C115X8MMTC

Delivery time 1 - 2 days **

1 From 2