Our experts are here for you!
+49 8152 92898-88
info@sautershop.com
Routing
Router Bits 8 mm Router Bits Panel Raising Cutters

Panel Raising Cutters shank 8 mm

The panel raising cutter is used for flattening the wood, for example on furniture doors and kitchen fronts. Various Forms, radii and diameters are available. Which special dimensions you choose for the  cutter is on the one hand a matter of taste and on the other hand is determined by the strength and dimensions of the Workpiece. If the routing cutter is guided on the ball bearing, classical or curved fillings can be routed.

More Information

4 Article found

Thumb Mould Cutter D 30,2 mm E-15660

Thumb Mould Cutter D 30,2 mm

E-15660

D 30,2 mm | NL1 6.5 mm | NL2 10.5 mm | S 8 mm | SL 32 mm

Delivery time 1-2 days
 
EUR 70.47
incl. 19% VAT
Profile-Facing Cutter Z2 T-C150X8MMTC

Profile-Facing Cutter Z2

T-C150X8MMTC

D: 41 mm | D2: 7 mm | C (NL): 12 mm | R: 12 mm | S: 8 mm

Delivery time 1-2 days
 
EUR 105.61
incl. 19% VAT
Facing Cutter HM Z2 T-C187X8MMTC

Facing Cutter HM Z2

T-C187X8MMTC

D: 45 mm | D2: 11 mm | NL (C): 17 mm | A: 10° | GL (OL): 49,5 | S: 8

Delivery time 1-2 days
 
EUR 98.15
incl. 19% VAT
Panel Raising Ogee Cutter D: 50,8 mm E-17190

Panel Raising Ogee Cutter D: 50,8 mm

E-17190

D 50,8 mm | NL 12,7 mm | R 9,52 mm | T 19 mm | S 8 mm | SL 32 mm

Delivery time 1-2 days
 
EUR 102.55
incl. 19% VAT
Thumb Mould Cutter D 30,2 mm E-15660

Thumb Mould Cutter D 30,2 mm

D 30,2 mm | NL1 6.5 mm | NL2 10.5 mm | S 8 mm | SL 32 mm
Delivery time 1-2 days
Article no.: E-15660
 
EUR 70.47
incl. 19% VAT
Profile-Facing Cutter Z2 T-C150X8MMTC

Profile-Facing Cutter Z2

D: 41 mm | D2: 7 mm | C (NL): 12 mm | R: 12 mm | S: 8 mm
Delivery time 1-2 days
Article no.: T-C150X8MMTC
 
EUR 105.61
incl. 19% VAT
Facing Cutter HM Z2 T-C187X8MMTC

Facing Cutter HM Z2

D: 45 mm | D2: 11 mm | NL (C): 17 mm | A: 10° | GL (OL): 49,5 | S: 8
Delivery time 1-2 days
Article no.: T-C187X8MMTC
 
EUR 98.15
incl. 19% VAT
Panel Raising Ogee Cutter D: 50,8 mm E-17190

Panel Raising Ogee Cutter D: 50,8 mm

D 50,8 mm | NL 12,7 mm | R 9,52 mm | T 19 mm | S 8 mm | SL 32 mm
Delivery time 1-2 days
Article no.: E-17190
 
EUR 102.55
incl. 19% VAT

Panel raising cutters for hand and table routers


A distinction must be made between working with the hand router and with the bench router. In the current category, you will only find cutters that are suitable for the hand router. Panel raising cutters are usually supplied without ball bearings. A distinction must be made between the different forms of the  cutter: Depending on the profile form, a distinction is made between double hollow - flattening cutter, carnis profile, oblique flattening and flattening in chamfer profile.

The quality of the carbide-tipped cutters meets professional requirements. Working and total length are different in each case, so you are sure to find the right flattening cutter for manual work for your workpiece here.