Dowel drills for Routers

The big advantage when routing dowel holes with the hand router in contrast to the drill is-

A exact 90° drilling/routing can be guaranteed by the base plate of the router
The fine depth adjustment on the router greatly facilitates the exact determination of the drilled depth for the wooden dowel

Our dowel drills for routers are available from Ø 3 mm to Ø 12 mm. All dowel cutters are carbide tipped and have two pre-cutters which ensure a very clean hole edge even in coated panel materials.

AØ = Cutter Diameter | NL = wCutter Length | SØ = Shaft Diameter | GL= Total length

More Information

D: 3 mm l NL (C): 35 mm l GL (OL): 57 mm l SL: 23 mm l S: 8 mm

EUR 36.38 *

T-C180X8MMTC

D: 5 mm l NL (C): 34 mm l GL (OL): 57 mm l SL: 23 mm l S: 8 mm

EUR 30.36 *

T-C174X8MMTC

D:- 5 mm | NL: 30 mm | GL: 57 mm | SL: 27 mm

EUR 43.11 *

E-24000

D: 6 mm l NL (C): 35 mm l GL (OL): 70 mm l SL: 23 mm l S: 8 mm

EUR 32.78 *

T-C175X8MMTC

D: 8 mm l NL (C): 35 mm l GL (OL): 70 mm l SL: 23 mm l S: 8 mm

EUR 33.80 *

T-C176X8MMTC

D:- 8 mm | NL: 30 mm | GL: 57 mm | SL: 27 mm

EUR 48.93 *

E-24002

D: 10 mm l NL (C): 35 mm l GL (OL): 70 mm l SL: 23 mm l S: 8 mm

EUR 36.75 *

T-C177X8MMTC

Set of 3 with the diameters: Ø 5 mm | Ø 6 mm | Ø 8 mm | For drilling/drillingRouting of row holes and dowel holes

EUR 84.37 *

SA-T-5-6-8DF

D:- 12 mm | NL: 30 mm | GL: 57 mm | SL: 27 mm

EUR 71.61 *

E-24004

Dowel Drill Routers

Unfortunately, many people do not yet know that there are routing tools for routers that can be used to drill dowel holes. Especially with row holes for shelving or The big advantage when routing dowel holes with the hand router in contrast to the Solutions with the drilling machine consist in the fact that a safe and exact 90° drilling / routing can be guaranteed by the base plate of the router built at right angles to the spindle. The fine depth adjustment on the routing machine also greatly facilitates the exact determination of the depth of the drilled hole for the wooden dowel. Our dowel drills for routers are available from 3 mm to 12 mm Diameter. All dowel cutters are carbide tipped and have two pre-cutters which ensure a very clean hole edge even in coated panel materials.

For an overview of all 8router cutters mm shafts please click here.