NEW. INNOVATIVE. PROFESSIONAL.
 MO. - FR. 08:30 - 12:30 HRS / 14:00 - 17:30 HRS

Tongue & groove cutter for precise wood joints

In addition to stationary routing machines with a routing head, it is also possible to make tongue and groove connections on a small routing table with a router if a suitable tongue and groove cutter is used ...has.

We offer tongue and groove sets with 8 or 12 mm shafts. They each consist of a spindle groove cutter with 2 groove discs, which are suitable for routing the spring. For routing of the groove, a grooved washer is removed from the spindle. Our carbide tipped tongue and groove cutters are suitable for board thicknesses up to 19.05 mm (3/4 inch). For thicker panels, the following must be done in two Work steps can be milled. For safety reasons, we recommend using tongue and groove cutters only in conjunction with routing tables.

Tongue and groove cutters

Close filters
No results were found for the filter!
Tongue & groove cutter HM Z2

HM cutter for tongue and groove joints
D: 41 mm l NL (C): 6,35 mm l KL (B): 9,5 mm

€96.77 *
T-C158X8MMTC

Restocking soon

Tongue & Groove Set D 41 mm

D 41 mm | NL 6.35 mm | T 9.5 mm | S 8 mm | SL 32 mm

€107.04 *
E-17390

Delivery time 1 - 2 days **