Beading Cutters 8mm

For a number of router jobs, quarter router cutters without ball bearings are required, especially if you want to rout directly into the surface. The "blunt" tip of the Quarter rod end mills without ball bearings are usually ground to allow immersion in the wood. You can use these routing cutters for edge processing as well as for surface design.

R= radius | D= diameter | NL= effective length | SL= Shaft length | S= Shaft 8 mm

R: 3 mm | D: 17 mm | NL: 10 mm | GL: 44 mm | S: 8 mm

EUR 90.80 *

TI-OC3-8

R 4 mm | D 19 mm | NL 11 mm | S 8 mm | SL 32 mm

EUR 38.01 *

E-12760

R: 4 mm | D: 14 mm | B: 13 mm | L: 41 mm

EUR 40.33 *

KLE-C112-140-R

R 5 mm | D 21 mm | NL 12 mm | S 8 mm | SL 32 mm

EUR 39.37

EUR 19.49 *

E-12762

R: 5 mm | D: 16 mm | B: 13 mm | L: 41 mm

EUR 41.50 *

KLE-C112-160-R

R 6 mm | D 23 mm | NL 13 mm | S 8 mm | SL 32 mm

EUR 41.71 *

E-12764

R: 6 mm | D: 18 mm | B: 13 mm | L: 41 mm

EUR 42.76 *

KLE-C112-180-R

R: 6.4 mm | D: 19 mm | B: 13 mm | L: 41 mm

EUR 42.76 *

KLE-C112-190-R

R 8 mm | D 27 mm | NL 15 mm | S 8 mm | SL 32 mm

EUR 45.24 *

E-12766

R 9,5 mm | D 31,7 mm | NL 16,7 mm | S 8 mm | SL 32 mm

EUR 48.65 *

E-12768

R: 10 mm | D: 31 mm | NL: 17 mm | GL: 50 mm | S: 8 mm

EUR 99.03 *

TI-OC10-8