NEW. INNOVATIVE. PROFESSIONAL.
MO. - FR. 08:30 - 12:30 HRS / 14:00 - 17:30 HRS

The routing head at a glance

Not all routing heads are the same. Here, too, a wide variety of routing heads are available for a wide variety of applications. Here you will find the rebate cutter head, counter profile cutter head and swivel cutter head up to the universal moulding cutter head, the exactly fitting routing head for your application. We have also provided the matching accessories for you in an extra category. There you will find Thrust & reducing rings, with or without ball bearings.

The routing head in profile

The routing head is available either with a steel or aluminium body in various diameters. Moulding knives are available both ready ground in form and as a blank for its own design.

Note: MEC routing heads may only be used with automatic routing machines (e.g. four-sided planing machine).
routing heads with the designation MAN for manual manual feed must always be equipped with deflectors and must not be used without them. For manual Manual feed also counts the use of a feed device.

Close filters
1 From 2
No results were found for the filter!
Intermediate slot routing cutter for adjustable...

Ø D: 160mm | B: 7,5mm | Lc: 42mm | Z2

€122.50 *
I-F602-16730

Delivery time 1 - 2 days **

routing head for table routing machine Set...

UNIVERSAL moulding cutter head set - manual feed
Ø 100mm, Ø Total D: 138mm, cutting width B: 40,
Ø bore d: 30mm, aluminium

€201.21 *
I-F021-10030S01

Delivery time 1 - 2 days **

Thrust ring with ball bearing 125/30

Ø outside: 125 mm | height: 18 mm | Ø bore: 30 mm

€50.11 *
I-F679-12530

Delivery time 1 - 2 days **

Thrust ring with ball bearing 105/30

Ø outside: 105 mm | height: 18 mm | Ø bore: 30 mm

€50.11 *
I-F679-10530

Delivery time 1 - 2 days **

Thrust ring with ball bearing 100/30

Ø outside: 100 mm | height: 18 mm | Ø bore: 30 mm

€58.89 *
I-F679-10030

Delivery time 1 - 2 days **

Thrust ring with ball bearing 95/30

Ø outside: 95 mm | height: 18 mm | Ø bore: 30 mm

€47.34 *
I-F679-09530

Delivery time 1 - 2 days **

Thrust ring set

Set of 3: Thrust washers with ball bearing (ALU)

Ø outside: 95 / 105 / 125 mm | height: 18 mm | Ø bore: 30 mm

€103.48 *
I-F679-00030

Delivery time 1 - 2 days **

Reducing rings for routing & cutter heads

Reducing rings - 1 pair
Ø outside: 50 mm | Ø inside: 30 mm

€25.42 *
I-F098-05030

Delivery time 1 - 2 days **

Reducing rings for routing & cutter heads

Reducing rings - 1 pair
Ø outside: 40 mm | Ø inside: 30 mm

€23.00 *
I-F098-04030

Delivery time 1 - 2 days **

Rebate routing head 125 Z4/V4 steel MAN

Rebate routing head for straight cut
Ø D: 125mm, rebate depth Lc: 50mm,- Z4 / V4, Ø bore d: 30mm, steel

€149.80 *
I-F608-92530

Delivery time 1 - 2 days **

Rebate routing head 125 Z4/V4 Alu MAN

Rebate routing head for straight cut-'
Ø D: 125mm, rebate depth Lc: 50mm, Z4 / V4, Ø bore d: 30mm, aluminium

€115.32 *
I-F608-12530

Delivery time 1 - 2 days **

Adjustable groove cutter 160 x 30 Z4/V4

Adjustable slot routing cutter with pre-cutters 160 Z4/V4
Steel with carbide inserts and pre-cutters for perfect finishing.

€199.90 *
I-F602-14531

Delivery time 1 - 2 days **

Counter profile routing cutter Z2 MAN Alu

Counter profile routing cutter
D 120 mm bore 30 mm width 40 mm

€169.08 *
I-F641-12130

Delivery time 1 - 2 days **

Flat routing cutter - clockwise rotation

Flat routing cutter - clockwise rotation
Data: Ø D: 160mm, cutting width B: 20mm, Z: 2, Ø bore d: 30mm,- aluminium.

€174.57 *
I-F631-16030

Delivery time 10 Workdays

Concave-convex multi-radius routing cutter

D: 119 mm | B: 25 mm | Z: 2 | Bore d: 30 mm

€189.90 *
I-F612-30830

Delivery time 10 Workdays

Swivel knife head 120 mm

D: 120 mm | B: 40 mm | Z: 2 | Angle: +45-° / -45-° | Bore d: 30 mm

€211.28 *
I-F607-12030

Delivery time 1 - 2 days **

Spiral jointing knife head Z 12 D 62

Ø 62 mm | Cutting depth: 80 mm | d: 30 mm
For manual feed | made of aluminium

€123.90 *
I-F606-08030

Delivery time 1 - 2 days **

Rebate routing head 125 Z4/V4 Alu MAN

Rebate routing head Z4V4- with pulling cut Ø D
: 125mm, rebate depth Lc: 50mm, Z4/ V4, Ø bore d: 30mm Alu

€144.01 *
I-F603-12530

Delivery time 1 - 2 days **

Adjustable groove cutter 160 x 30 Z4/V4

Adjustable slot routing cutter with pre-cutters 160 Z4/V4
Steel with carbide inserts and pre-cutters for perfect finishing.

€233.19 *
I-F602-16030

Delivery time 1 - 2 days **

HM Profile & Counter Profile Knives Type A

HM Profile & Counter Profile Knife TypeA in SET 2 pieces
.

€91.67 *
SET-F641-90100

Delivery time 10 Workdays

Universal routing head D 100 mm steel MAN

Universal safety profile cutter head Z2 MAN
Ø Head: 100 mm | Cutting width: 40 - 50 mm | Ø Dowel: 30 mm | Steel

€73.48 *
I-F020-10030

Delivery time 1 - 2 days **

HM profile knife R3

HM profile knife 25 x 23 x 2 mm, radius 3 mm
1 piece for multi-radius routing cutter F612-30830

€33.69 *
I-F612-90300

Delivery time 10 Workdays

Spiral jointing knife head Z 18 D 80

Ø 80 mm | Cutting depth: 120 mm | d: 30 mm
For manual feed | made of aluminium

€162.90 *
I-F606-12030

Delivery time 1 - 2 days **

Rebate routing head 125 Z4/V4 steel MAN

Rebate routing head Z4V4- with pulling cut Ø D
: 125mm, rebate depth Lc: 50mm, Z4/ V4, Ø drill hole d: 30mm Steel-

€169.87 *
I-F603-92530

Delivery time 1 - 2 days **

Universal routing head D 100 mm Alu MEC

Universal safety profile cutter head Z2 MEC
Ø head: 100 mm |cutting width: 40 - 50 mm | Ø dowel: 30 mm | aluminium

€67.97 *
I-F021-10031

Delivery time 1 - 2 days **

Universal routing head D 100 mm Alu MAN

Universal safety profile cutter head Z2 MAN
Ø Head: 100 mm | Cutting width: 40 - 50 mm |Ø Mandrel: 30mm | Alu

€74.82 *
I-F021-10030

Delivery time 1 - 2 days **

Universal routing head D 120 mm steel MAN

Universal safety profile cutter head Z2 MAN
Ø Head: 120 mm | Cutting width: 40 - 50 mm | Ø Dowel: 30 mm | Steel

€89.90 *
I-F020-12030

Delivery time 1 - 2 days **

HM Profile & Counter Profile Knives Type B

HM Profile & Counter Profile Knife TypeB in SET 2 pieces
.

€91.67 *
SET-F641-90200

Delivery time 10 Workdays

Thrust ring with ball bearing 80/30

Ø outside: 80 mm | height: 18 mm | Ø bore: 30 mm

€41.26 *
I-F679-08030

Delivery time 1 - 2 days **

HM profile knife R4

HM profile blade 25 x 23 x 2 mm, radius 4 mm 1
piece for multi-radius routing cutter F612-30830

€33.69 *
I-F612-90400

Lieferung ab

Universal routing head D 120 mm Alu MAN

Universal safety profile cutter head Z2 MAN
Ø Head: 120 mm | Cutting width: 40 - 50 mm | Ø Mandrel: 30 mm | Alu

€88.66 *
I-F021-12030

Delivery time 1 - 2 days **

Universal routing head D 100 mm steel MEC

Universal safety profile cutter head Z2 MEC
Ø Head: 100 mm | Cutting width: 40 - 50 mm | Ø Dowel: 30 mm | Steel

€57.95 *
I-F020-10031

Delivery time 10 Workdays

HM Profile & Counter Profile Knives Type C

HM Profile & Counter Profile Knife TypeC in SET 2 pieces
.

€91.67 *
SET-F641-90300

Delivery time 10 Workdays

HM profile knife R5

HM profile blade 25 x 23 x 2 mm, radius 5 mm 1
piece for multi-radius routing cutter F612-30830

€33.69 *
I-F612-90500

Delivery time 10 Workdays

Universal routing head D 120 mm steel MEC

Universal safety profile cutter head Z2 MEC
Ø Head: 120 mm | Cutting width: 40 - 50 mm | Ø Dowel: 30 mm | Steel

€69.26 *
I-F020-12031

Lieferung ab

HM Profile & Counter Profile Knives Type D

HM Profile & Counter Profile Knife TypeD in SET 2 pieces
.

€91.67 *
SET-F641-90400

Delivery time 1 - 2 days **

1 From 2