Our experts are here for you!
+49 (0) 8152 92898-0
info@sautershop.com
Routing
Router Jigs & Machines Dovetail Jigs IGM Dovetail Jig FD300

IGM Dovetail Jig FD300

IGM Dovetail Jig FD 300 - Base Unit
Half Blind Dovetail Joint
Box Comb Dovetails
Through Dovetail Joint
Guide Bushes
Adapter plates
FAQ, Videos and more

The FD300 tine routing machine is inexpensive and extremely versatile! Basic unit with enclosed routing template for half-covered dovetail tines (size 12.7 mm). Incl. matching copy sleeve. Pleaserouter cuttersorder these separately. The copy sleeves required here with an outside diameter of 60 mm are mounted directly onto the base plate of the router with the aid of two bores at 50 mm intervals. This applies to all TREND, Perles, ELU, DeWalt and some Metabo devices. For all other hand routers, an adapter plate is required to accommodate the copy sleeve.

More Information

23 Article found

Dovetail cutter Z2

A: 14° | D: 12.7 mm | S: 8 mm
Delivery time 1-2 days
EUR 33.19 *

Routing tines with a solid tine routing tool

Inexpensive tine routing machine

The FD300 tine routing machine is inexpensive and extremely versatile!

"A well-functioning routing machine that isn't expensive. Solidly manufactured and successfully tested in practice over many years. After a short test phase, easy and simple to operate - for precise and beautiful wood joints."
- Quote: Guido Henn from Handbuch Oberfräse.

Basic unit with enclosed routing template for half-covered dovetail tines (size 12.7 mm). Incl. matching copy sleeve. Pleaserouter cuttersorder these separately.

Further templates for half-covered tines (size 6.35mm), open finger tines and tines open on both sides can also be supplied on request acquire.

The required copy sleeve is included in the scope of delivery of the individual stencils, unless it is already included in the basic unit. routing cutters must be ordered separately.

The copy sleeves required here with an outside diameter of 60mm are mounted directly onto the base plate of the router with the aid of two bores at 50mm intervals. This applies to all TREND, Perles and ELU models, many DeWalt models and some Metabo devices. For all other hand routers, an adapter plate is required to accommodate the copy sleeve.