Routing Template for Letters & Numbers

SignPro Professional Set for routing for letters & numbers

Total 204 letters and numbers, 2 font sizes (4 and 7 cm font height)
Complete with 2 HM router bits, 2 fixing clamps, guide rods, extensions, copying rings with metal sleeves
Font width max. 900 mm

By viewing the video, you agree that your data will be transmitted to YouTube and that you have read the privacy policy.

System is suitable for all surfaces and offers the routing for letters/words and numbers in two font sizes (4 and 7 cm). Letters can be placed in any order in the Guide rods are pushed until the desired word is assembled from individual templates. Then rout with a hand router and the corresponding HM bit (2 different types, each with a diameter of 8 mm Shank included) the letter stencils until the complete word is a recess. The guidance of the milling cutter in the templates is ensured with the aid of corresponding copy rings, which are screwed into the base plate supplied. Transparent base plate with patented bayonet lock for the copy rings, suitable for all commercially available hand routers  centering pin, as well as copy rings with brass sleeves are included.

Letters are milled horizontally, numbers can be milled with this system in horizontal or vertical arrangement. In the SignPro system 204 letter templates are delivered, where the more frequently used letters are present several times, e.g. "S", "E", "N", etc.

Advantages of the SignPro Set M1262 compared to Signcrafter M1256:

• new, more stable guide rods
• incl. flat fixing clamps, which can be moved out with the router even at the edge without bumping
• more letters and numbers
• Numbers can also be applied vertically
• Copy rings with brass sleeves
• 2 HM-router instead of only one

Technical data:

Letters and numbers set 2201:

• Height: 82 mm
• Width: 57 mm

Letters and numbers set 2202:

• Height: 82 mm
• Width: 57 mm

Letters and Numbers Set 2203:

• Height: 82 mm
• Width: 55 mm

HM-Radius Router Cutter 70025 D9,5 S8 GL 50 mm is suitable for the lettering stencils size 7 cm, for the smaller lettering stencils the HM- D 6,Radius Router Cutter35 S8 GL 50 mm is included in the package.

Conclusion: complete system, newly revised, you only need a manual router.

Delivery without router.

Instructions for use:

In this In the user manual, you will find a list of compatible irouters.