Our experts are here for you!
Circular Table Saws

Circular Table Saws

Mafell Erika Pull-Push Saws
Mafell Erika Pull-Push Saws
DeWalt Circular Table Saw
DeWalt Circular Table Saw
Bosch circular table saw
Bosch circular table saw
Festool trimming saws PRECISIO
Trimming Saws - PRECISIO
Circular table saw TKS 80 EBS
Circular table saw TKS 80 EBS
Cordless Table Saw CSC SYS 50
Cordless Table Saw CSC SYS 50
Harvey ALPHA circular table saws
Harvey ALPHA circular table saws
Laguna Fusion table saws
Laguna Fusion table saws
Triton TWX Work Center
Triton TWX Work Center
Workbench castors and transport castors
Workbench castors and transport castors
FAQ, Videos and more

You will find the following circular table saws in our programme:

  • The famous Mafell Erika - the saw that almost everyone thinks of when they hear "underfloor pull saw".
  • Festool offers two excellent underfloor pull saws (CS 50 and CS 70) in addition to its TKS 80 Precisio table saw.
  • The Triton Workcenter TWX becomes a table saw with the TWX 7CS001 saw table insert module (another module turns the Workcenter into a router table).

66 Article found

MAFELL clamping piece MAF-038294
Delivery time 3-10 days
Article no.: MAF-038294
 
EUR 49.03
incl. 19% VAT
MAFELL Telescopic Rod with Support MAF-038309
Delivery time 1-2 days
Article no.: MAF-038309
 
EUR 99.25
incl. 19% VAT
MAFELL support and holding rail 650 mm MAF-201309
Delivery time 3-10 days
Article no.: MAF-201309
 
EUR 106.61
incl. 19% VAT
MAFELL additional table MAF-208437
Delivery time 1-2 days
Article no.: MAF-208437
 
EUR 207.06
incl. 19% VAT
MAFELL Drop Stop MAF-038306
Delivery time 3-10 days
Article no.: MAF-038306
 
EUR 44.15
incl. 19% VAT
MAFELL support and holding rail MAF-038686
Delivery time 1-2 days
Article no.: MAF-038686
 
EUR 145.89
incl. 19% VAT
MAFELL support and holding rail 840 mm MAF-201310
Delivery time 1-2 days
Article no.: MAF-201310
 
EUR 137.31
incl. 19% VAT
Fence guide extension with telescopic rod and drop stop MAF-201331
Delivery time 1-2 days
Article no.: MAF-201331
 
EUR 144.59
incl. 19% VAT
MAFELL additional table MAF-208439
Delivery time 1-2 days
Article no.: MAF-208439
 
EUR 343.90
incl. 19% VAT
MAFELL Fold-Away Support MAF-203153
Delivery time 1-2 days
Article no.: MAF-203153
 
EUR 323.68
incl. 19% VAT
MAFELL sliding table MAF-038563
Delivery time 1-2 days
Article no.: MAF-038563
 
EUR 634.27
incl. 19% VAT
Fence guide extension 1000 mm  long, incl. drop stop MAF-203396
Delivery time 1-2 days
Article no.: MAF-203396
 
EUR 168.97
incl. 19% VAT
MAFELL chip collection system Cleanbox starter set MAF-203402
Delivery time 1-2 days
Article no.: MAF-203402
 
EUR 68.66
incl. 19% VAT
MAFELL sliding table MAF-201320
Delivery time 1-2 days
Article no.: MAF-201320
 
EUR 489.09
incl. 19% VAT

The centerpiece of the workshop and indespensible on the construction site


The table saw is an almost indispensable woodworking machine. In the carpentry/joinery workshop, in addition to the large circular table saw or sizing saw, you will often find one (or more) small circular table saws that are used for specific jobs or are available for mobile use on the construction site. For private users, the small underfloor pull saw or mobile table saw often takes the place of the large stationary machines, whether for reasons of space or cost.

To be able to work efficiently and safely on a table saw, it should have a certain minimum level of equipment. This includes the rip fence and a cross-cut fence to guide the workpiece safely and accurately. The safety guard and the riving knife serve to ensure safety at work, and for health protection it should be possible to connect an extraction system. In addition to this basic equipment, there are optional accessories that make the work easier. First and foremost are the push blocks and sticks and table extensions.

The different types of saw

Underfloor pull saws


The underfloor pull saw is the classic table saw for mobile use. A small, handy and light saw that can be quickly stowed in the vehicle and is just as quickly ready for use again on the construction site. It differs from the normal table saw in that the workpiece is not guided through the saw blade, but the saw blade is guided through the workpiece. However, it can also be used in the conventional way by locking the saw blade.

In its more than forty years of construction, the Erika from Mafell has always remained at the cutting edge through constant improvements. It offers comfort and safety features that make it popular with both commercial and private users for mobile and stationary use.

The CS 50 and CS 70 from Festool are characterised by a very low weight for the power offered. The extensive range of accessories for both machines proves to be practical, useful and well thought-out not only for use on the construction site, but also in the workshop.

Circular table saws


In contrast to the usual "construction site circular saws", the TKS 80 table saw from Festool is a high-quality and extremely precise saw that can be equipped with all the usual add-ons (fences, worktable extensions, sliding table and more). Particularly noteworthy is the integrated SawStop function, which offers an exceptionally high level of injury protection for the user. With non-conductive materials, it reliably prevents serious injuries caused by accidentally getting your fingers or hand caught in the running saw blade.

Workcenter


The Workcenter TWX from Triton is a multifunctional table that can be used for a variety of woodworking tasks. However, it stands out from other manufacturers' models because there are two modules that transform it into a router table or saw table. The TWX7CS001 circular saw module is equipped with a rip fence, a powerful motor and an integrated dust extraction system and weighs 15.2 kg.

Accessories for table saws


In addition to various push sticks and workpiece sliders, fences and pressure combs in particular serve to guide the workpiece safely on the table saw. We offer an extensive range of accessories for table circular saws, both manufacturer-specific for the table circular saws from our range (Mafell and Festool), as well as for mobile and stationary table circular saws from other manufacturers - right up to clamping devices from RUWI for large panel saws and sliding table saws.

Circular saw blades


The most important accessory for the circular saw is the saw blade. It is decisive for the cutting quality and also to a considerable extent for the safety at work on the circular saw. We offer a very wide range of saw blades from leading manufacturers (Freud, Trend, Festool, Mafell and others) that meet the demands of commercial users - even as a private user, you should not settle for anything less. You will find special circular saw blades for circular table saws as well as saw blades for other saw types, such as rocker saws, sliding table saws, panel saws and many more in our range.