Countersinks

Cross Hole Countersink

Seven-edged Countersink with Pointed Angle 90°

Countersink HSS

Countersinks Sets

FAQ, Videos and more

In connections with screws, the screw head should not normally protrude beyond the surface of the material - not only for aesthetic reasons, but also for safety considerations. Therefore, screws are countersunk unless round-headed, pan-headed or similar screws are used, where the head rests on the surrounding material.

More Information

Seven-edged countersink with pointed angle 90° Set

in a wooden box | Countersink Ø: 10, 13, 16, 20, 25 mm

Delivery time 1-2 days

EUR 105.15 *

FAMAG Pre-drill 4 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 4 mm

Delivery time 1-2 days

EUR 5.58 *

FAMAG Pre-drill 5 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 5 mm

Delivery time 1-2 days

EUR 6.10 *

Terrace drill countersink set 4 pieces

in a wooden box | Drill-Ø: 4, 5, 6 mm | with depth stop

Delivery time 1-2 days

EUR 76.97 *

FAMAG Pre-drill 3 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 3 mm

Delivery time 1-2 days

EUR 3.67 *

Countersink with cross hole 90° D 13 mm

AØ: 13 mm | SØ: 8 mm | NL: 50 mm | GL: 80 mm

Delivery time 1-2 days

EUR 25.12 *

Seven-edged countersink with pointed angle 90°

AØ: 10 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 22.99 *

Countersink with cross hole 90° D 16 mm

AØ: 16 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 28.80 *

Seven-edged countersink with pointed angle 90°

AØ: 13 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 22.92 *

Seven-edged countersink with pointed angle 90°

AØ: 16 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 23.17 *

Countersink with cross hole 90° D 20 mm

AØ: 20 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 33.74 *

Seven-edged countersink with pointed angle 90°

AØ: 20 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 30.27 *

Seven-edged countersink with pointed angle 90°

AØ: 25 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 29.11 *

Seven-edged countersink with pointed angle 90°

AØ: 30 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

EUR 33.71 *

HSS- Countersink 90° DIN 335C

AØ: 6,3 mm | SØ: 5 mm | GL: 45 mm | Ideal for deburring the drill holes for the aluminium profile rails

Delivery time 1-2 days

EUR 11.88 *

HSS countersink 90° KEILBIT

AØ: 12.4 mm | SØ: 1/4" (6.35 mm) | GL: 35 mm

Delivery time 1-2 days

EUR 13.20 *

HSS countersink 90° KEILBIT

AØ: 8.3 mm | SØ: 1/4" (6.35 mm) | GL: 31 mm

Delivery time 1-2 days

EUR 8.73 *

HSS countersink 90° KEILBIT

AØ: 20.5 mm | SØ: 1/4" (6.35 mm) | GL: 41 mm

Delivery time 1-2 days

EUR 24.67 *

HSS countersink 90° KEILBIT

AØ: 6.3 mm | SØ: 1/4" (6.35 mm) | GL: 31 mm

Delivery time 1-2 days

EUR 7.94 *

HSS countersink 90° KEILBIT

AØ: 10.4 mm | SØ: 1/4" (6.35 mm) | GL: 34 mm

Delivery time 1-2 days

EUR 10.56 *

HSS countersink 90° KEILBIT

AØ: 16.5 mm | SØ: 1/4" (6.35 mm) | GL: 40 mm

Delivery time 1-2 days

EUR 20.03 *

CLEAN WORKING RESULTS WHEN FASTENING SCREWS

The countersinks in our programme are basically suitable for solid wood, most wood materials and plastics. You can also use them on softer metals. For iron and steel, however, you should primarily use the corresponding HSS countersinks.

Countersink types - When to use which countersink?

There are different types of countersinks available for woodworking, from which you can choose according to your own quality requirements and budget:

Cone countersink: for simple work
90°Countersink: for occasional countersinking of drill holes in metal and for higher demands on the quality of countersinking in wood
Cross Hole countersink: delivers faster and better results and also features a longer service life, so the investment pays off