Countersinks

Cross Hole Countersink

Seven-edged Countersink with Pointed Angle 90°

Countersink HSS

Countersinks Sets

FAQ, Videos and more

In connections with screws, the screw head should not normally protrude beyond the surface of the material - not only for aesthetic reasons, but also for safety considerations. Therefore, screws are countersunk unless round-headed, pan-headed or similar screws are used, where the head rests on the surrounding material.

More Information

Festool Deburring countersink QLS D 5-15 CE

Cross hole countersink QLS D5-15 CE | Diameter: 5-15 mm

Delivery time 1-2 days

Article no.: F-492521

EUR 51.91

incl. 19% VAT

Seven-edged countersink with pointed angle 90° Set

in a wooden box | Countersink Ø: 10, 13, 16, 20, 25 mm

Delivery time 1-2 days

Article no.: FA-177550500

EUR 99.00

incl. 19% VAT

FAMAG Pre-drill 4 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 4 mm

Delivery time 1-2 days

Article no.: FA-357714000

EUR 5.58

incl. 19% VAT

FAMAG Pre-drill 5 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 5 mm

Delivery time 1-2 days

Article no.: FA-357715000

EUR 6.10

incl. 19% VAT

Terrace drill countersink set 4 pieces

in a wooden box | Drill-Ø: 4, 5, 6 mm | with depth stop

Delivery time 1-2 days

Article no.: FA-357750400

EUR 76.97

incl. 19% VAT

Festool Deburring countersink QLS D 2-8 CE

Cross hole countersink QLS D2- 8 CE | Diameter: 2-8 mm

Delivery time 1-2 days

Article no.: F-492520

EUR 42.01

incl. 19% VAT

FAMAG Pre-drill 3 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 3 mm

Delivery time 1-2 days

Article no.: FA-357713000

EUR 3.67

incl. 19% VAT

Countersink with cross hole 90° D 13 mm

AØ: 13 mm | SØ: 8 mm | NL: 50 mm | GL: 80 mm

Delivery time 1-2 days

Article no.: FA-211501300

EUR 25.12

incl. 19% VAT

Seven-edged countersink with pointed angle 90°

AØ: 10 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

Article no.: FA-177501000

EUR 22.99

incl. 19% VAT

Countersink with cross hole 90° D 16 mm

AØ: 16 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

Article no.: FA-211501600

EUR 28.80

incl. 19% VAT

Seven-edged countersink with pointed angle 90°

AØ: 13 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

Article no.: FA-177501300

EUR 22.92

incl. 19% VAT

Seven-edged countersink with pointed angle 90°

AØ: 16 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 3-10 days

Article no.: FA-177501600

EUR 23.17

incl. 19% VAT

Countersink with cross hole 90° D 20 mm

AØ: 20 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 3-10 days

Article no.: FA-211502000

EUR 33.74

incl. 19% VAT

Seven-edged countersink with pointed angle 90°

AØ: 20 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

Article no.: FA-177502000

EUR 30.27

incl. 19% VAT

Seven-edged countersink with pointed angle 90°

AØ: 25 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 1-2 days

Article no.: FA-177502500

EUR 29.11

incl. 19% VAT

Seven-edged countersink with pointed angle 90°

AØ: 30 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mm

Delivery time 3-10 days

Article no.: FA-177503000

EUR 33.71

incl. 19% VAT

HSS- Countersink 90° DIN 335C

AØ: 6,3 mm | SØ: 5 mm | GL: 45 mm | Ideal for deburring the drill holes for the aluminium profile rails

Delivery time 1-2 days

Article no.: KE-327000063

EUR 11.88

incl. 19% VAT

HSS countersink 90° KEILBIT

AØ: 12.4 mm | SØ: 1/4" (6.35 mm) | GL: 35 mm

Delivery time 1-2 days

Article no.: KE-329000124

EUR 14.48

incl. 19% VAT

HSS countersink 90° KEILBIT

AØ: 8.3 mm | SØ: 1/4" (6.35 mm) | GL: 31 mm

Delivery time 1-2 days

Article no.: KE-329000083

EUR 9.59

incl. 19% VAT

HSS countersink 90° KEILBIT

AØ: 20.5 mm | SØ: 1/4" (6.35 mm) | GL: 41 mm

Delivery time 1-2 days

Article no.: KE-329000205

EUR 27.10

incl. 19% VAT

HSS countersink 90° KEILBIT

AØ: 6.3 mm | SØ: 1/4" (6.35 mm) | GL: 31 mm

Delivery time 1-2 days

Article no.: KE-329000063

EUR 8.73

incl. 19% VAT

HSS countersink 90° KEILBIT

AØ: 10.4 mm | SØ: 1/4" (6.35 mm) | GL: 34 mm

Delivery time 1-2 days

Article no.: KE-329000104

EUR 10.56

incl. 19% VAT

HSS countersink 90° KEILBIT

AØ: 16.5 mm | SØ: 1/4" (6.35 mm) | GL: 40 mm

Restocking soon

Article no.: KE-329000165

EUR 22.00

incl. 19% VAT

CLEAN WORKING RESULTS WHEN FASTENING SCREWS

The countersinks in our programme are basically suitable for solid wood, most wood materials and plastics. You can also use them on softer metals. For iron and steel, however, you should primarily use the corresponding HSS countersinks.

Countersink types - When to use which countersink?

There are different types of countersinks available for woodworking, from which you can choose according to your own quality requirements and budget:

Cone countersink: for simple work
90°Countersink: for occasional countersinking of drill holes in metal and for higher demands on the quality of countersinking in wood
Cross Hole countersink: delivers faster and better results and also features a longer service life, so the investment pays off