akku-tischkreissaege-festool-f-576820-01

akku-tischkreissaege-festool-f-576820-02

akku-tischkreissaege-festool-f-576820-03

akku-tischkreissaege-festool-f-576820-04

akku-tischkreissaege-festool-f-576820-05

akku-tischkreissaege-festool-f-576820-06

akku-tischkreissaege-festool-f-576820-07

akku-tischkreissaege-festool-f-576820-08

akku-tischkreissaege-festool-f-576820-09

akku-tischkreissaege-festool-f-576820-10

Festool Akku-Tischkreissäge CSC SYS 50 EBI-Basic

Chip Collection | Parallel Rail | Systainer | NOT FOR SALE OUTSIDE EUROPE

Livraison sous 2 à 3 jours ouvrés

1.874,71 €

Prix indiqués TVA et hors frais d'envoi.

Marque:Festool
N° d'article:F-576820
Poids:15kg

Festool Cordless table saw CSC SYS 50 EBI-Basic

Precise sawing to go. The cordless table saw in Systainer format.

The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It's just as versatile in use, as it is tremendously convenient in its size. Make parallel cuts of up to 280 mm, cross-cut widths of up to 450 mm and angled cuts of -2° to 47°. The unique digital operation produces results with maximum precision, down to accuracies within a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines. Together with the UG-CSC-SYS underframe, you have the perfect worktable immediately on hand, and transport from the vehicle to the point of use thus succeeds effortless. The CSC SYS 50: Precise sawing to go.

Accessoires compatibles

untergestell-ug-csc-sys-festool-f-577001-01

Festool support UG-CSC-SYS

Châssis pour scie circulaire sur table CSC-SYS 50 Hauteur de travail : 677 mm | Poids : 18,13 kg

Livraison sous 2 à 3 jours ouvrés

359,00 €

incl. TVA

Art.-Nr: F-577001

Lame de scie circulaire Festool HW 168x1,8x20 WD42

For TS 60 K, CSC-SYS 50

Livraison sous 2 à 3 jours ouvrés

73,99 €

incl. TVA

Art.-Nr: F-205765

Lame de scie circulaire HW 168x1,8x20 W28

For TS 60 K, CSC-SYS 50

Livraison sous 2 à 3 jours ouvrés

59,00 €

incl. TVA

Art.-Nr: F-205764

set-akkupack-ladegeraet-festool-f-577104-01

Festool Kit énergie SYS 18V 4x4,0/TCL 6 DUO

Pour la plupart des outils sans fil 18 V 4 batteries 18 V | 1 chargeur rapide | en Systainer

Livraison sous 2 à 3 jours ouvrés

479,00 €

incl. TVA

Art.-Nr: F-577104

set-akkupack-ladegeraet-festool-f-577707-01

Kit d'énergie SYS 18V 2x5,0/TCL 6 DUO

Pour la plupart d'outils sans fil 18 V 2 batteries 5,0 Ah | 1 chargeur rapide DUO | dans un systainer

Livraison sous 2 à 3 jours ouvrés

339,00 €

incl. TVA

Art.-Nr: F-577707

Festool Jeu de lames de scie KSB-SORT/2 W/L 168x1,8

Pour TS 60 K, TSV 60 K, CSC SYS 50

Livraison sous 2 à 3 jours ouvrés

169,00 €

incl. TVA

Art.-Nr: F-578567

Festool Assortiment de lames de scie circulaire KSB-SORT/3 W/L/A 168x1,8

Pour TS 60 K, TSV 60 K, CSC SYS 50

Livraison sous 2 à 3 jours ouvrés

199,00 €

incl. TVA

Art.-Nr: F-578568

Festool Jeu de lames de scie circulaire KSB-SORT/3 W 168x1,8

Pour TS 60 K, TSV 60 K, CSC SYS 50

Livraison sous 2 à 3 jours ouvrés

149,00 €

incl. TVA

Art.-Nr: F-578566

Lame de scie circulaire HW 168x1,8x20 TF 52

For TS 60 K, CSC-SYS 50

Livraison sous 2 à 3 jours ouvrés

99,00 €

incl. TVA

Art.-Nr: F-205766

Lame de scie circulaire HW 168x1,8x20 PW16

For TS 60 K, CSC-SYS 50

Livraison sous 2 à 3 jours ouvrés

49,00 €

incl. TVA

Art.-Nr: F-205763

Festool HighPower Pack de batteries BP 18 Li 4,0 HPC-ASI

pour tous les appareils 18 Volt (sauf ETSC 125, RTSC 400, DTSC 400)

Livraison sous 2 à 3 jours ouvrés

120,00 €

incl. TVA

Art.-Nr: F-205034

11 Produits

Données techniques

Battery voltage: 2 x 18 Volt
Idle speed: 4,500 - 6,800 rpm
Mounting hole saw blade: 20.00 mm
Angle of inclination: -10 to +47
Cutting height 0°: 0 - 48 mm
Cutting height 45°: 0 - 34 mm
Cutting height -10°: 21 - 32 mm
Mitre angle: 0 - 70
Parallel cutting width: 280.00 mm
Table height: 280.00 mm
Dimensions (L x W x H): 512 x 396 x 296 mm
Dust extraction connection Ø: 27/36 mm
Drive type: Battery
Weight: 15,00 kg

Propriétés & avantages

Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°.
Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels.
Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe.
Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre.
Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured.
Convenient: Four saw blade positions can be saved and selected via the digital display.
Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results.
Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°
Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision
Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results
Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance
Long-lasting: The brushless EC-TEC motor is long-lasting, robust and maintenance-free
Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display
Dust-free: Chip collection bag for dust-free work, even without a mobile dust extractor
Healthy working with a system: Ideal also in combination with the Festool cordless extractors
Compatible: Fits together with the entire Festool Systainer system and bott vehicle equipment
Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one
Unique: Three-year warranty for battery packs and chargers too

Alternatives intéressantes

tischkreissaege-laguna-i-151-fusion3dro-01

LAGUNA Scie circulaire sur table Fusion 3

Scie circulaire sur table professionnelle et très bien équipée | Lame de scie pivotante | Finition soignée | Ajustement facile

Livraison sous 2 à 3 jours ouvrés

3.159,13 €

incl. TVA

Art.-Nr: I-151-FUSION3DRO

1 Produits

Festool Cordless table saw CSC SYS 50 EBI-Basic