• Fraisage
  • Couteaux profilés + déflecteur

Couteaux profilés + déflecteur

Category image

Dans notre gamme de couteaux profilés pour le travail du bois, vous trouverez le couteau profilé et le déflecteur adaptés à chaque tête de fraisage.

Comme vous ne voulez pas acheter une nouvelle tête de coupe en cas d'usure des couteaux profilés dans la tête de fraisage, il est bon de connaître un point de contact où vous pouvez obtenir rapidement et facilement la paire de couteaux profilés et de déflecteurs qui vous convient.

Milling profiles on the router table.

A universal router head can be equipped with sets of knives that in themselves offer a variety of profiles. Added to this are the possibilities offered by simply raising or lowering the cutter head. Finally, on most bench routers the spindle can be tilted, which multiplies the number of possible profiles even further. If you still don't have the profile you want, you can simply use blanks that can be ground to the desired shape.

We offer high-quality profile knives in 40 mm and 50 mm lengths and for each set of knives also the matching deflectors, the use of which is prescribed for manual feed (MAN). The deflectors prevent the material from hitting the knife edge in a large thickness, which could lead to kickbacks (so-called chip thickness limitation). So for each pair of moulding knives you order, you need the matching deflectors, which are clamped together in the router cutter head in order to be able to work safely and comply with the relevant regulations. The correspondence between profile knives and deflectors can be easily checked by means of the article numbers.