Masque de protection respiratoire Trend P3 taille M-L
Masque de protection respiratoire Trend P3 taille M-L
Masque fin et compact | avec un champ de vision optimal et un bon ajustement | Cet article ne peut être ni échangé, ni repris pour des raisons d'hygiène !
Masque fin et compact | avec un champ de vision optimal et un bon ajustement | Cet article ne peut être ni échangé, ni repris pour des raisons d'hygiène !
Boîte de rangement pour le demi-masque Stealth P3 augmente la durée de vie du masque de protection respiratoire
Expédition dans les 24 heures (jours ouvrables)
29,10 €
19,99 €
incl. TVA
Art.-Nr: T-STEALTH-2
5 Produits
Données techniques
Masks comply with EN140: 1998 and are CE certified
Weight: 131 g
Temperature range: -10°C +40°C
Storage: The Air Stealth respirator half-mask must not be stored in direct sunlight for long periods of time and not longer than the specified expiration date. If one of the Storage not in accordance with the manufacturer's recommendations can affect the service life of the filter.
Use: The Air Stealth respirator half mask is suitable for multi-shift use, but it is recommended that the half mask be checked before each use - Before use, ensure that all parts have been stored according to the recommended storage instructions below and have not expired; this is indicated on the label on the carton indicated - Remove the packaging and check filter and mask for damage. If in doubt, replace any part that is suspected to be defective - Ensure that the desired application and ambient air have been evaluated by a competent person and are consistent with the Air Stealth HEPAC® P3 (R) Filter application (see application table and additional warnings and restrictions)
Care: Remove the filters before each cleaning - do not wash the filters! Regularly: Use a soft cloth moistened with a soap solution containing neutral soap and water to clean the breathing apparatus unit and remove any dirt remove Thoroughly: Remove the grill, complete with neck strap, and then the filters from the mask body. NOTE: The valve bodies are part of the mask and remain in position. Remove the mask with the Immerse the grid in a mild solution of neutral soap and water. Rinse all parts with clean water and allow to dry in non-contaminated ambient air. Put the grill back on the Connect the mask body and replace the filters with new ones.
Lifetime: The filters can be used until they are saturated and the wearer finds them uncomfortable. The service life depends on the working environment, working methods and the nature of the dust sources. The filter performance remains constant at over 99.99% throughout the entire period of use. The mask is durable. The lifetime depends on storage and care.
Warnings and restrictions: Do not use the Air Stealth respirators in the following cases: - air quality, ambient air or the nature of the hazard is unknown - the ambient air is low in oxygen (<19.5%) - the ambient air is enriched with oxygen - the gas or vapour concentrations are unknown or exceed the value for the filter class - the ambient air is explosive - the intended user has facial hair extending beyond the edge
Propriétés & avantages
Demi-masque de nouvelle génération avec design ergonomique à profil bas (champ de vision optimal et bon ajustement)
Offre moins de résistance respiratoire et une meilleure efficacité de filtration
Les matériaux utilisés pour les masques et les filtres sont hypoallergéniques, inodores, de qualité médicale, sans latex et sans silicone.
Les filtres P3 remplaçables ont une efficacité minimale de 99,99 %.
Domaines d'application : Travail du bois, agriculture, construction, matériaux de construction, alimentation, fabrication, industrie minière, soudure et métallurgie
