Circular saw blade HM 350 x 3.5/2.5 x 30 mm, Z=72

Circular saw blade HM from FREUD

• D 350 x 3,5/2,5 x 30 mm
• Teeth Z=72 WZ (alternating tooth) with 10° pos. tooth angle
• Auxiliary holes for driving pins
  FT02 = 2/9/46.4 + 2/10/60 (measured center to center)
• For table circular saws and hand circular saws.
• Recommended minimum / maximum speed: approx. 2,300 - 4,800 rpm.
• Max. suitable cutting depth range: 0-45 mm (solid wood), 0-35 mm (board materials), 0-30 mm (plywood)
• Low-noise sawing thanks to sound-absorbing slots.
• Saw blade for all types of wood - fine cutting quality.
• For longitudinal and cross cuts in softwood, hardwood, plywood, board materials, MDF, chipboard.
• With ICE silver coating - improved gliding properties - anti-rust.

Further characteristics of the saw blade:

• Trunk body made of first-class steel quality, hardness 45Hrc.
• Trunk body laser cut, straightened and clamped.
• Special carbide teeth, adapted to each saw type, from our own production and development.
• Perfect grinding, lowest tolerances and finest carbide grain guarantee excellent cutting quality.
• Absolutely precise and smooth running.
• Honed drilling.
• Solder consisting of 3 layers: Silver-Copper-Silver - provides maximum stability and protects against tooth loss due to impacts caused by foreign bodies.

Optionally we recommend the purchase of a Industrial cleaner TR-CLEAN-500 for cleaning and care of the saw blades.