- Clamps
- Kreg Clamps
Kreg Clamps
AUTOMAXX clamps from Kreg combine the characteristics of a screw clamp with the possibility of presetting the desired clamping pressure. Without screws, always easily and quickly the exact desired clamping pressure - regardless of the thickness of the workpiece. All clamps have attachable protective caps to avoid pressure marks on sensitive workpieces and specially shaped, stable clamp rails for minimum flex even with high clamping pressure. Simply push the movable jaw against the workpiece and lock the AUTOMAXX handle. The technology takes care of the rest - with each clamping operation the fixed clamping pressure is automatically adjusted.
Different clamp variants
AUTOMAXX clamps combine the advantages of AUTOMAXX technology with an expandable clamping range.
AUTOMAXX special clamps such as KHCCC - the 90° corner clamp or KHCRA - the angle clamp make clamping corners easier.
AUTOMAXX quick-action clamps such as the KHC3 & KHC6 with large pressure surfaces for an even distribution of clamping force are compatible with the clamp adapters of the Kreg pocket hole templates. The KBC3 & KBC6 are ideally suited as bench clamps on workbenches such as the KWS1000 or KWS500 or alternatively in the Kreg® T-slot rail, an adapter plate on all other workbenches, or by means of a workbench adapter and a 20mm hole adapter.