Angle Attachments

An angle attachment is a useful tool for the drill or cordless screwdriver. It is used when you have to drill around a corner or drill a hole or screw in in confined spaces and hard-to-reach places.

The angular attachments are available with and without chucks or with direct attachment for drills and bits with 1/4" (6.35 mm) hexagonal end.

KREG 90° Pocket-Hole Driver

Angle attachment for screwing in confined spaces | 90° screw connections | 1/4" mounting | problem solver

29,74 €

Right angle screwdriver 90 Fix

Offset screwdriver with 60 Nm | Incl. handle for better guidance

93,78 €

Right angel drill/screwdriver set 90Fix

Offset screwdriver with 60 Nm | in wooden box, with HSS-G twist drills: 3, 4, 5, 6 mm, countersink, machine chuck and bits

100,07 €

Milescraft Drive90PLUS

Angle drill Drill 90Plus | 90-° drill head with quick-action drill chuck- 9.5 mm

23,50 €

Milescraft Drive90PLUS

Impact ready square drill adaptor for 1/4" bits | with small drill head

19,94 €

Milescraft Drive90PLUS + 4 Wood Bits

Compact angle attachment in set with 4 short drills for wood | Wood drill bit with - Ø 3, 4, 5, 6 mm

49,00 €

Festool Angle attachment AN-UNI

for TPC 18/4, TDC 18/4 | and all Festool C and T cordless drills with FastFix fixture (except CXS/TXS)

187,65 €

Festool Eccentric attachment EX-UNI

for TPC 18/4, TDC 18/4 | and all Festool C and T cordless drills with FastFix fixture (except CXS/TXS)

158,73 €

Drilling and screwdriving even in hard-to-reach places

The angle attachment is inserted into the chuck or bit holder of the drill, and the drill bitis placed in the angle attachment. Depending on the model, you can then drill at right angles to the longitudinal axis of the machine or, with the 360° angle attachment Orbiter, at any angle. The angle attachment is particularly easy to guide precisely when drilling or screwing if it is equipped with an additional handle.

When screwing, the bit is inserted directly into the angle attachment. When drilling, make sure to use short drill bits, otherwise the advantage of the attachment is lost due to the length of the drill bit.