Clamps
Kreg Clamps

Kreg Clamps

AUTOMAXX clamps from Kreg combine the characteristics of a screw clamp with the possibility of presetting the desired clamping pressure. Without screws, always easily and quickly the exact desired clamping pressure - regardless of the thickness of the workpiece. All clamps have attachable protective caps to avoid pressure marks on sensitive workpieces and specially shaped, stable clamp rails for minimum flex even with high clamping pressure. Simply push the movable jaw against the workpiece and lock the AUTOMAXX handle. The technology takes care of the rest - with each clamping operation the fixed clamping pressure is automatically adjusted.

Classic quick clamp

Compatible with the drilling template Kreg Jig Jr.- R3 | Throat:- 51 mm

23,79 €

Kreg one-handed clamp Automaxx 600 mm

66,63 €

Kreg In-Line Clamp

clampable in holes 3/4" or 20 mm | 360° rotatable

29,74 €

Kreg quick clamp 76 mm

Compatible with the clamp adapter of the Kreg Jig Jr | Throat: 76 mm

35,69 €

Kreg quick clamp Face Clamp 152 mm

Automatic clamp Span:- 127 mm (6")

53,54 €

Work clamp Automaxx 76 mm

Automatic workbench clamp | Kreg KBC-3 | span width: 76 mm

59,49 €

Kreg quick clamp Face Clamp 76 mm

Automatic clamp Span width: 76 mm

52,35 €

Kreg 90° quick clamp Automaxx

Clamp for 90-° angle | Span:- 127 mm | Workpiece thickness: up to 79 mm |

58,30 €

90° clamp for corner connections

independently aligning, automatically joined at squares | for 90-° / T-corner connections for drawers, cupboards, boxes & many more

59,50 €

3/4" workbench adapter

Bench Clamp Workbench adapter Workpiece clamp adapter Workpiece clamp adapter

29,74 €

Kreg Screw Clamp Automaxx 152 mm

adjusts automatically to the thickness of the workpiece | Projection: 152 mm

63,06 €

Kreg workpiece clamp with 3/4" workbench adapter

Automatic adjustment to the material thickness | with - clamp 360°- rotatable on the platform

83,29 €

Klamp Plate Work clamp base plate

Workpiece clamp base plate | Dimensions: 76 x 102 mm (3 x 4 inch)

23,79 €

Different clamp variants

AUTOMAXX clamps combine the advantages of AUTOMAXX technology with an expandable clamping range.

AUTOMAXX special clamps such as KHCCC - the 90° corner clamp or KHCRA - the angle clamp make clamping corners easier.

AUTOMAXX quick-action clamps such as the KHC3 & KHC6 with large pressure surfaces for an even distribution of clamping force are compatible with the clamp adapters of the Kreg pocket hole templates. The KBC3 & KBC6 are ideally suited as bench clamps on workbenches such as the KWS1000 or KWS500 or alternatively in the Kreg® T-slot rail, an adapter plate on all other workbenches, or by means of a workbench adapter and a 20mm hole adapter.