Countersinks
In connections with screws, the screw head should not normally protrude beyond the surface of the material - not only for aesthetic reasons, but also for safety considerations. Therefore, screws are countersunk unless round-headed, pan-headed or similar screws are used, where the head rests on the surrounding material.
Seven-edged countersink with pointed angle 90° Set
in a wooden box | Countersink Ø: 10, 13, 16, 20, 25 mmDelivery time 2-3 days
126,52 €
incl. VAT
FAMAG Pre-drill 5 mm
Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 5 mmDelivery time 2-3 days
6,41 €
incl. VAT
Festool Deburring countersink QLS D 2-8 CE
Cross hole countersink QLS D2- 8 CE | Diameter: 2-8 mmDelivery time 2-3 days
42,83 €
incl. VAT
Festool Deburring countersink QLS D 5-15 CE
Cross hole countersink QLS D5-15 CE | Diameter: 5-15 mmDelivery time 2-3 days
52,91 €
incl. VAT
FAMAG Pre-drill 4 mm
Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 4 mmDelivery time 2-3 days
5,85 €
incl. VAT
FAMAG Pre-drill 3 mm
Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 3 mmDelivery time 2-3 days
3,89 €
incl. VAT
Terrace drill countersink set 4 pieces
in a wooden box | Drill-Ø: 4, 5, 6 mm | with depth stopDelivery time 2-3 days
98,39 €
incl. VAT
FAMAG carbide drill countersink set with depth stop
depth stop with ball bearings | depth stop made of aluminium | for terrace construction 4-pieceDelivery time 2-3 days
154,64 €
99,90 €
incl. VAT
Seven-edged countersink with pointed angle 90°
AØ: 10 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
24,10 €
incl. VAT
Countersink with cross hole 90° D 13 mm
AØ: 13 mm | SØ: 8 mm | NL: 50 mm | GL: 80 mmDelivery time 2-3 days
26,28 €
incl. VAT
Seven-edged countersink with pointed angle 90°
AØ: 13 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
24,01 €
incl. VAT
Countersink with cross hole 90° D 16 mm
AØ: 16 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
30,14 €
incl. VAT
Seven-edged countersink with pointed angle 90°
AØ: 16 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
24,25 €
incl. VAT
Countersink with cross hole 90° D 20 mm
AØ: 20 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
35,31 €
incl. VAT
Seven-edged countersink with pointed angle 90°
AØ: 20 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
31,69 €
incl. VAT
Seven-edged countersink with pointed angle 90°
AØ: 25 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
30,49 €
incl. VAT
Seven-edged countersink with pointed angle 90°
AØ: 30 mm | SØ: 8 mm | NL: 60 mm | GL: 90 mmDelivery time 2-3 days
35,28 €
incl. VAT
HSS- Countersink 90° DIN 335C
AØ: 6,3 mm | SØ: 5 mm | GL: 45 mm | Ideal for deburring the drill holes for the aluminium profile railsDelivery time 2-3 days
11,88 €
incl. VATCLEAN WORKING RESULTS WHEN FASTENING SCREWS
The countersinks in our programme are basically suitable for solid wood, most wood materials and plastics. You can also use them on softer metals. For iron and steel, however, you should primarily use the corresponding HSS countersinks.
Countersink types - When to use which countersink?
There are different types of countersinks available for woodworking, from which you can choose according to your own quality requirements and budget:
- Cone countersink: for simple work
- 90°Countersink: for occasional countersinking of drill holes in metal and for higher demands on the quality of countersinking in wood
- Cross Hole countersink: delivers faster and better results and also features a longer service life, so the investment pays off