Countersink HSS

Countersinks are the tool of choice when you want to countersink screw heads flush with the surface of the material. The countersinks are also useful when you want to deburr drill holes in wood or light metals.

The HSS countersink 90° DIN 335C is particularly suitable for deburring drill holes for aluminium profile rails. Our HSS (high-speed steel) countersinks have an angle of 90 degrees between the cutting edges, so that the walls of the drill hole are cut at 45 degrees. This corresponds to the angle of inclination of the underside of the head for countersunk screws.

HSS- Countersink 90° DIN 335C

AØ: 6,3 mm | SØ: 5 mm | GL: 45 mm | Ideal for deburring the drill holes for the aluminium profile rails

11,88 €

Difference between countersink and cross countersink

The three-fluted countersinks are less expensive than the cross countersinks, which we also have in our programme. However, the cross countersinks are usually characterised by these advantages:

longer tool life
faster cutting
better quality results