Festool Saw blade WOOD FINE CUT HW 216x2,3x30 W60
Fine tooth saw blade | 216 x 2.3 x 30119,00 €
- FESTOOL - all Festool articles
- Circular Saws
- Circular Saw Blades
- Saw Blade Fine Tooth
Saw Blade Fine Tooth
These special circular saw blades from Festool with fine tooth are ideal for sawing coated and veneered boards, solid wood, plywood, MDF and more.
Festool Saw blade WOOD FINE CUT HW 190x2,8x30 W48
Fine tooth saw blade 190x2,8x30 W48 | Suitable for: AT 65, AP 6589,00 €
Festool Saw blade WOOD FINE CUT HW 260x2,5x30 W80
Festool Circular saw blade WOOD FINE CUT HW 260x2,5x30 W80 | For: KS 120 and KS 88129,90 €
109,00 €
Festool Saw blade WOOD FINE CUT HW 225x2,6x30 W48
Fine tooth saw blade 225x2,6x30 W48 | Suitable for: CS 7099,00 €
Festool Saw blade WOOD FINE CUT HW 160x2,2x20 W48
Fine tooth saw blade 160x2,2x20 W48 | Suitable for: TS 55, TSC 55, ATF 55 and AP 5573,99 €
Festool Saw blade WOOD FINE CUT HW 216x2,3x30 W48
Fine-tooth saw blade 216x2,3x30 W48 | Suitable for: SYMMETRIC 70 E99,00 €
Festool Saw blade WOOD FINE CUT HW 210x2,4x30 W52
Circular saw blade WOOD FINE CUT HW 210x2,4x30 | rake angle: 5°.99,00 €
79,90 €
Festool Saw blade WOOD FINE CUT HW 230x2,5x30 W48
HW 230x2,5x30 W4874,68 €
Festool Saw blade WOOD FINE CUT HW 168x1,8x20 WD42
For TS 60 K, CSC-SYS 5073,99 €
Festool Saw blade WOOD FINE CUT HW 190x2,4 FF W48
Fine tooth saw blade 190x2,4 FF W48 | Suitable for: CS 5089,00 €
Festool Saw blade WOOD FINE CUT HW 254x2,4x30 W60
for TKS 80124,00 €
Festool Saw blade WOOD FINE CUT HW 160x1,8x20 WD42
HW 160x1,8x20 WD4269,00 €
Festool Saw blade WOOD STANDARD HW 160x1,6x20 W18
for HKC 55 K, TSC 55 K69,00 €
Festool Saw blade WOOD FINE CUT HW 160x1,6x20 FWWW35
for HKC 55 K, TSC 55 K69,00 €
Festool Saw blade WOOD RIP CUT HW 160x1,6x20 PW12
for HKC 55 K, TSC 55 K69,00 €
Festool Saw blade WOOD UNIVERSAL HW 160x1,6x20 FWW25
for HKC 55 K, TSC 55 K69,00 €
Special Festool Circular Saw Blades
Very suitable for:
- Coated boards; laminate panels (recommended speed level 6)
- Veneered boards; parquet (recommended speed level 6)
- Solid wood cross-section; blockboards (recommended speed level 6)
- Plywood; Multiplex/Layer (recommended speed level 6)
- MDF medium density fibreboard (recommended speed level 6)
Well suited for:
- Plastics hard; PVC hard (recommended speed level 4-6)
- Acrylic glass (Plexiglas) (recommended speed level 4-6)
- HDF hardboard (recommended speed level 4-6)
- Chipboard raw (recommended speed level 4-6)
Suitable for:
- Plastics soft; PVC soft (recommended speed level 3-6)
- Solid wood longitudinal cut (recommended speed level 6)