set-erika-unterflurzugsaege-mafell-set-erika60-1-01

set-erika-unterflurzugsaege-mafell-set-erika60-1-02

set-erika-unterflurzugsaege-mafell-set-erika60-1-03

set-erika-unterflurzugsaege-mafell-set-erika60-1-04

MAFELL ERIKA 60 push-pull saw Set

sautershop exclusive set: The original for mobile and stationary use. | Pull length: 217 mm | swivelling from -2 to 47° | saw blade Ø: 190 x 30 mm

Shipping within 24 hours (working days)

2.010,98 €

incl. VAT / excl. shipping costs

Brand:MAFELL
Article no.:SET-ERIKA60-1
Weight:35.974kg

MAFELL ERIKA 60 push-pull saw including stand and extra blade

The original for mobile and stationary use

The Mafell Erika table saw is probably one of the best-known mobile table saws in the woodworking trade and among many private woodworkers. The Erika is used on construction sites as well as in the workshops of woodworkers with high demands on technology and performance.

Technical Data

Cutting height: from 2 to 61 mm
Cutting height at 45°: from 2 to 42 mm
Pivoting range: from -2 to 47
Pull length: 217 mm
Working surface table top: 412 x 544 mm
Working height without stationary device: 310 mm
Working height with stationary device: 845 mm
Nominal idling speed: 1,900 - 3,800 rpm
Rated input: 1,300 W
Weight: 21 kg
Universal motor: 230 V / 50 Hz

Properties & Advantages

Split protective guard for more safety
Efficient extraction through optimised dust channel for less dust generation
Mobile use due to low dead weight. Carried from A to B in no time
Compact and powerful thanks to a cutting height of 61 mm (max.) - a cutting length of 215 mm is achieved with a material thickness of 12 mm.
More safety: With voltage drop switch to prevent uncontrolled restarting after a power interruption.
Intuitive: The operation of the ERIKA leaves no questions unanswered. Clearly designed controls are all logically located on the front of the machine.
Areas of application: Cross-cut and rip cuts; table saw function, diagonal cuts up to 47°.
Including stand set-up the perfect workshop table saw with cross-cut function