oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-01

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-02

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-03

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-04

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-05

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-06

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-07

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-08

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-09

Pivoting Router Lift OFL3.0K

Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-° | for router motors with neck holder Ø 43 mm | exact height fine adjustment & magnetic reduction plates

Shipping within 24 hours (working days)

709,49 €

638,54 €

incl. VAT / excl. shipping costs

Brand:sauter
Article no.:SA-OFL3.0K
Weight:6.96kg

Technical Data

Dimension insert plate: 298 x 235 x 9 mm
Corner radius Insert plate: 19.05 mm (3/4")
Height adjustment travel/rotation: 4 mm
Max. Adjustment travel: 101 mm
Height milling lift (max. extended): 240mm
Max. Cutter diameter: 55 mm
Weight: approx. 5 kg

Properties & Advantages

Quality from Germany
High quality, solid construction. Construction of high quality aluminium and steel.
Fine height adjustment to 1/10mm
Height fine adjustment extremely precise adjustable, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw.
Smooth-running spindle columns
Enable a stepless and exact fine height adjustment.
Compatible to common Routing
The OFL3.0K is compatible with a wide range of commercially available milling motors with 43 mm Euro-neck. All models can be found below.
Safe Routing for any diameter
The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the milling cutter - especially for small workpieces, a "snagging and getting stuck" on the edge of the hole eliminated!
Assembly made easy
Simple mounting of the milling cutter to the mounting adapter.
Routing also without rip fence
2 drill holes for the fence pin allow you to free e.g. round workpieces without rip fence (see optional accessories separately - not in Delivery Includes).
Absolutely flat
Simple levelling of the OFL3.0K by means of levelling screws in the insertion plate. Optionally a frame for a permanent level adjustment can be purchased.
No own drillings necessary
Mounting holes (countersunk head) for quick Router Tableinstallation are already pre-drilled.
Lasered scaling
Millimeter scaling on the surface for exact alignment of the rip fence.
Additional recessed grip for easy changing of the reduction plates.
Magnetism for mounting additional accessories is distributed over the entire reduction plate.