Power Feed Units

A feed unit makes work on the router or milling table more precise and safer: The workpiece is fed past the cutter at a constant feed speed and uniform contact pressure. Neither of these is guaranteed with manual feeding. We offer two models for different requirements, one of which is also available in a three-phase version. The units can also be used (for certain jobs) on jointers and circular table saws.

IGM M3 Power Feeder

Ideal for DIY router tables and table saws | 3 castors | thrust reversing switch | 230 V

428,40 €

IGM M3M power feeder with magnetic base

For cast iron and steel tables | Infinitely variable speed adjustment

680,68 €

655,00 €

IGM AF32 Power Feeder 230v

For router tables, table saws and jointers | 3 castors | reverse thrust switch | 230 V

679,49 €

IGM AF32 Power Feeder 400V

For router tables, table saws and jointers | 3 castors | reverse thrust switch | 400 V

698,53 €

Quick Fit Universal Plate for M3 + AF32 Feeders

Quick installation | Without having to drill

71,30 €

IGM magnetic base for M3 feeder

For cast iron and steel tables | 450 kg holding force

253,65 €

Spare Roller D76x30 for M3 Feeders

Replacement roller for IGM feed unit M3 | Ø = 76 mm | Width = 30 mm | Trackless

16,68 €

Spare Roller D80x30 for AF32 Feeders

Replacement roller for IGM feed units AF32 | Ø = 80 mm | Width = 30 mm

14,22 €

More accurate work results and safer working on the stationary router table.

An incorrect or varying feed rate when routing can lead to errors in the routing pattern (tear-outs, burn marks and more). In addition, there is always a residual risk of injury when the workpiece is fed manually, even when protective devices are used. Both of these risks are virtually eliminated when using a feed unit.

Our feeders are characterised by the stable design of the frame, spring-mounted rollers with good grip and easy positioning of the rollers in all three directions. The work in progress can be stopped with the switch-controlled reverse gear. The smaller model offers stepless speed adjustment, while on the two larger ones the feed is adjusted in four steps from 5 m/min to 11 m/min.

The smaller M3 feed unit is particularly recommended for small routing tables, while the two larger models, AF32Mand AF32T feedunits, are also suitable for semi-professional to professional use on medium-sized routing tables or table routing machines.