Router Guide Bushes & Sub-Bases

Guide bushes for routers, also known as copy sleeves or thrust rings, are required to guide the router along a template or stop if you do not use router cutters which have their own ball bearing. We offer one of the widest ranges of copy rings for routers, suitable for direct mounting on many routers, or by means of adapter plates of the UNIBASE or FRB type on almost all routers on the market. Basically there are two quality levels of copy rings in our shop:

Copy tubes made of steel: are very precise and durable
Copy rings made of plastic: are recommend the hobby craftsman for occasional use

Bosch Guide Bush Adapter

For Bosch routers without integrated adapter | to screw on

28,81 €

Bosch Guide Bush Ø16 mm

Template Guide Ø: 16 mm | With Quick-fastening Bayonet lock

19,37 €

Bosch Guide Bush Ø24 mm

Template Guide Ø: 24 mm | With Quick-fastening Bayonet lock

27,20 €

Guide Bush-Ring

Guide Bush -Rings | suitable for GB793, gives 14.3 mm OD, use with 3.2 mm cutter diameter

12,79 €

Bosch Guide Bush Ø27 mm

Template Guide Ø: 27 mm | With Quick-fastening Bayonet locks

29,32 €

Guide Bush-Ring

Guide Bush ring 30mm to 53,9mm | 30mm - 53.9mm

12,79 €

Screws

Screws f. Guide Bush2Ba x 6.35 mm (pack of 10) | 2BA X 6,35 mm

5,84 €

Bosch Guide Bush Ø40 mm

Template Guide Ø: 40 mm | With Quick-fastening Bayonet lock

29,96 €

Bosch Guide Bush Ø13 mm

Template Guide Ø: 13 mm | With Quick-fastening Bayonet lock

25,78 €

Bosch Guide Bush Ø17 mm

Template Guide Ø: 17 mm | With Quick-fastening Bayonet lock

25,59 €

Copy ring D 11,1 x 4mm

OD: 11.1 mm l Sleeve 4 mm

14,41 €

Bosch Guide Bush Ø30 mm

Template Guide Ø: 30 mm | With Quick-fastening Bayonet lock

29,70 €

Festool Copying ring KR-D 5/8 /OF 1010

for OF 900, OF 1000, OF 1010, OF 1010 R, KF

19,94 €

Festool Copying ring KR-D 1/2 /OF 1010

for OF 900, OF 1000, OF 1010, OF 1010 R, KF

19,94 €

Festool Copying ring KR-D 3/8 /OF 1010

for OF 900, OF 1000, OF 1010, OF 1010 R, KF

19,94 €

Festool Copying ring KR-D 3/4 /OF 1010

for OF 900, OF 1000, OF 1010, OF 1010 R, KF

19,94 €

Festool Copying ring KR-D 1 /OF 1010

for OF 900, OF 1000, OF 1010, OF 1010 R, KF

19,94 €

Festool Copying ring KR-D 10,8/OF 1010

Copying ring KR-D 10,8/OF 1010 | D: 10,8 mm | d: 7,8 mm | For OF 900, OF 1000, OF 1010, OF 1010 R and KF

17,72 €

Guide Bush Holder

for DeWALT for DW624, DW625E, DW629

69,69 €

Guide Bush-Set 8 Pieces - Steel

Guide Bush -Set in 8 different sizes | Outside Ø 10, 12, 17, 20, 24, 27, 30 and 40 mm

68,75 €

Unibase-Trim Universal Trim Router Sub-Base 150mm

For holding guide bushes | 9 hole patterns for trim routers | Glass fibre reinforced | Precision centring

38,90 €

Centering pin for 8 mm and 1/4 shanks

for 1/4" (6,35mm) and 8mm shanks | max. Ø Centering head 40 mm

21,56 €

Unibase 150 Universal Plunge Router Sub-Base 150mm

For holding guide bushes | 13 hole patterns for most small routers | Glass fibre reinforced | Precision centring

38,90 €

Unibase 180 Universal Plunge Router Sub-Base 180mm

For holding guide bushes | 18 hole patterns | Glass fibre reinforced | Precision centring | Ø 180 mm

42,00 €

Steel or plastic copy rings to choose from

In combination with our routing templates for countering kitchen worktops, we recommend the use of steel thrust washers, as in these applications, on Because of the strong forces, plastic copy rings melt or break relatively quickly.

We recommend our plastic copy sleeves exclusively for use with the sample templates, e.g. Design Inlay Kit, SIGNCRAFTER letter routing templates or for simple work that requires cause little pressure on the copy rings. For all professional applications we recommend the use of steel sleeves.

Additional rings can also be used to reduce the thickness of the nose and thus the distance to the workpiece, especially during inlay work.