IGM Dovetail Jig FD300

The FD300 tine routing machine is inexpensive and extremely versatile! Basic unit with enclosed routing template for half-covered dovetail tines (size 12.7 mm). Incl. matching copy sleeve. Pleaserouter cuttersorder these separately. The copy sleeves required here with an outside diameter of 60 mm are mounted directly onto the base plate of the router with the aid of two bores at 50 mm intervals. This applies to all TREND, Perles, ELU, DeWalt and some Metabo devices. For all other hand routers, an adapter plate is required to accommodate the copy sleeve.

Dovetail Jig FD300

Produce box and dovetail joints quickly Working width max. 305 mm

164,96 €

IGM Mini Half Blind Dovetail Joint Template 6,35 mm

Optional template for a dovetail jig FD 300. | for material thickness 8-12 mm

71,84 €

Dovetail Jig FD300 Set

Set for creating box and dovetail joints incl. 2x router bits, for working widths up to 305 mm

239,00 €

Dovetail Jig FD300 Premium Set

Premium- Set for creating box and dovetail joints | incl. 4x router bits, for working widths up to 305 mm

359,00 €

Finger Routing Cutter

Finger Routing Cutter f. open finger tines, 12.7mm | TC (HM) for FD3130 & FD6130, and FD3190 & FD6190, with D 12.7 mm, 8 mm

31,95 €

Finger Routing Cutter

Finger Routing Cutter f. open finger tines, 8mm | TC (HM) with Z2, with D 8 mm, Shank8 mm, for FD3080 and FD6080

26,63 €

IGM Through Dovetail Joint Template 12,7 mm,

Optional template for a dovetail jig FD 300.| For material thickness 8-19 mm

71,83 €

IGM Box Comb Template 8 mm,

Optional template for a dovetail jig FD 300 | For material thickness 8-12 mm

69,90 €

Unibase-Trim Universal Trim Router Sub-Base 150mm

For holding guide bushes | 9 hole patterns for trim routers | Glass fibre reinforced | Precision centring

38,90 €

Unibase 150 Universal Plunge Router Sub-Base 150mm

For holding guide bushes | 13 hole patterns for most small routers | Glass fibre reinforced | Precision centring

38,90 €

Unibase 180 Universal Plunge Router Sub-Base 180mm

For holding guide bushes | 18 hole patterns | Glass fibre reinforced | Precision centring | Ø 180 mm

42,00 €

Dovetailing cutters

E: 7° | D: 19,05 mm | NL: 25,4 mm | SL: 44,6 mm

37,59 €

Dovetail cutter Z2

A: 14° | D: 12.7 mm | S: 8 mm

33,19 €

22,50 €

Dovetailing cutters

E: 8° | D: 6 mm | NL: 6,8 mm | S: 8 mm

35,68 €

Dovetail cutter Z2

A: 8° | D: 12.7 mm | SØ: 8 mm | NL: 20.45 mm | SL: 40 mm

33,74 €

Universal adapter plate

Adapter plate for router copy rings | for all routersn, undrilled, transparent, D=170 mm, thickness 8 mm

41,96 €

IGM Box Comb Template - 12,7 mm (1/2")

Optional template for a dovetail jig FD 300.| For material thickness 8-22 mm

71,84 €

Copy sleeve made of steel D 11.1 mm

OD: 11.1 mm l ID: 9 mm l Sleeve 6 mm

17,41 €

IGM Through Dovetail Joint Template 19 mm,

Optional template for a dovetail jig FD 300. | For material thickness 16-25 mm

71,84 €

Fixing pin

Unibase fixing pin 8mm /12mm | For 12 mm & 8 mm collets

4,62 €

Copy sleeve made of steel D 15.8 mm

OD: 15.8 mm l ID: 14 mm l Sleeve 6 mm

17,40 €

Copying sleeve made of steel D 22 mm

OD: 22 mm l ID: 19 mm l Sleeve 6 mm

17,41 €

Routing tines with a solid tine routing tool

Inexpensive tine routing machine

The FD300 tine routing machine is inexpensive and extremely versatile!

"A well-functioning routing machine that isn't expensive. Solidly manufactured and successfully tested in practice over many years. After a short test phase, easy and simple to operate - for precise and beautiful wood joints."
- Quote: Guido Henn fromHandbuch Oberfräse.

Basic unit with enclosed routing template for half-covered dovetail tines (size 12.7 mm). Incl. matching copy sleeve. Pleaserouter cuttersorder these separately.

Further templates for half-covered tines (size 6.35mm), open finger tines and tines open on both sides can also be supplied on request acquire.

The required copy sleeve is included in the scope of delivery of the individual stencils, unless it is already included in the basic unit. routing cutters must be ordered separately.

The copy sleeves required here with an outside diameter of 60mm are mounted directly onto the base plate of the router with the aid of two bores at 50mm intervals. This applies to all TREND, Perles and ELU models, many DeWalt models and some Metabo devices. For all other hand routers, an adapter plate is required to accommodate the copy sleeve.