MAFELL NC control cable M8 / 4-pin - 5m
For Mafell PV- and NC- router motors with external speed control | 4-pole | Length: 5 m | Socket: M830,94 €
Our consultants are here for you!
Our consultants are here for you!
The two router motors FM 800 and FM 1000 are compatible with routing tables, drilling/routing stands or small CNC routers.
With the standardized 43 mm clamping neck, the Mafell motors are suitable for light routing work and convince through:
The speed can be infinitely adjusted to any application. In addition, the digital electronics of the MAFELL rod routing machines are soft-start, Idle speed reduction, constant speed under load and overload protection.
Highest concentricity accuracy of < 0.05 mm at a distance of 25 mm (in the cone < 0.01 mm). Responsible for this extraordinary precision is the filigree tuning of all the Components and guarantees perfect results when working at the routing table.
The spindle can be locked on the routing motor at the push of a button for simple and convenient tool change.
Protects the spindle on the 43 mm clamping neck and bearing permanently against smallest particles, dust and chips.