Acrylic glass / Plexiglas

Acrylic glass (also known under the brand name Plexiglas) should only be scored with a knife and then cut or sawn with a jigsaw (or even a handsaw) in exceptional cases. The best way to achieve a high quality of cut is to cut it with a circular saw and a suitable saw blade.

DeWalt carbide-tipped circular saw blade "EXTREME" 250x30, 80TFZ

Chop saw blade for aluminium & plastic | On table saw for coated panels

74,99 €

DeWalt carbide-tipped circular saw blade "EXTREME" 305x30, 96TFZ

Chop saw blade for aluminium & plastic | On table saw for coated panels

94,99 €

Circular saw blade HM 168 x 1.8/1.2 x 20 mm, Z=52

Specially for Festool TS60 & CSC SYS50 | non-ferrous metals | plastic | trapezoidal flat tooth

49,90 €

Festool Saw blade ALUMINIUM/PLASTICS HW 168x1,8x20 F/FA 52

For TS 60 K, CSC-SYS 50

99,00 €

Circular saw blade HM 250 x 2.2/1.6 x 30 mm, Z=100

Circular saw blade HM - thin cut - for plastics and plexiglass | 250 x 2.2/1.6 x 30mm, Z=100 WZ

81,90 €

Circular saw blade HM 230 x 2.2/1.6 x 25.4 mm, Z=100

Circular saw blade HM - thin cut - for plastics and plexiglass | 230 x 2.2/1.6 x 25.4mm, Z=100 WZ

78,90 €

Circular saw blade HM 203 x 2.0/1.4 x 25.4 mm, Z=90

Circular saw blade HM - thin cut - for plastics & plexiglass | 203 x 2.0/1.4 x 25.4mm, Z=90 WZ

68,90 €

Circular saw blade HM 255 x 2.2/1.6 x 25.4 mm, Z=100

Circular saw blade HM - thin cut - for plastics and plexiglass | 255 x 2.2/1.6 x 25.4 mm, Z=100 WZ

81,90 €

Circular saw blade HM 178 x 1.5/1.0 x 25.4 mm, Z=80

Circular saw blade HM - thin cut - for plastics and plexiglass | 178- x 1,5/1,0 x 25,4mm, Z=80 WZ

58,91 €

Circular saw blade HM 250 x 2.4/1.8 x 30 mm, Z=80

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 250 x 2.4/1.8 x 30 mm, Z=80 TFF-P

136,89 €

Circular saw blade HM 300 x 2.8/2.2 x 30 mm, Z=96

Circular saw blade HM for plastics and Plexiglas | 300 x 2,8/2,2 x 30mm, Z=96 TFZ neg.

109,90 €

Circular saw blade HM 400 x 3.2/2.5 x 30 mm, Z=120

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 400 x 3.2/2.5 x 30 mm, Z=120 TFF-P

229,28 €

Circular saw blade HM 225 x 2.0/1.4 x 30 mm, Z=68

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 225 x 2.0/1.4 x 30 mm, Z=68 TFF-P

114,29 €

Circular saw blade HM 160 x 1.8/1.2 x 20/16 mm, Z=56

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 160 x 1.8/1.2 x 20/16 mm, Z=56 TFF-P

88,61 €

Circular saw blade HM 250 x 2.8/2.2 x 30 mm, Z=80

Circular saw blade HM for plastics and Plexiglas | 250 x 2,8/2,2 x 30mm, Z=80 TFZ neg.

97,90 €

Circular saw blade HM 120 x 1.8/1.2 x 20 mm, Z=40

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 120 x 1.8/1.2 x 20 mm, Z=40 TFF-P

72,99 €

Circular saw blade HM 350 x 2.4/1.8 x 30 mm, Z=108

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 350 x 2.4/1.8 x 30 mm, Z=108 TFF-P

193,21 €

Circular saw blade HM 200 x 2.0/1.4 x 30 mm, Z=64

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 200 x 2.0/1.4 x 30 mm, Z=64 TFF-P

101,97 €

Circular saw blade HM 300 x 2.4/1.8 x 30 mm, Z=96

Circular saw blade HM - thin cut - for aluminium, plastics and abrasive materials | 300 x 2.4/1.8 x 30 mm, Z=96 TFF-P

165,86 €

Circular saw blade HM 300 x 3.2/2.5 x 30 mm, Z=96

Circular saw blade HM for hard surfaces | 300 x 3.2/2.5 x 30mm, Z=96 DTZ

139,90 €

Circular saw blade HM 250 x 3.2/2.5 x 30 mm, Z=80

Circular saw blade HM for hard surfaces | 250 x 3.2/2.5 x 30mm, Z=80 DTZ

114,89 €

Circular saw blades for plastic glass of all kinds

For sawing plastic glass of all kinds, you need a suitable saw blade. In this case, suitable means fine toothing and not bevelled. Such a circular saw blade can then be used to saw acrylic glass, double-webbed sheets and similar materials.

You will find saw blades that meet these requirements here in our usual high quality for the table saw, plunge cut saw and the hand-held circular saw.

Please note that the correct speed of the circular saw also plays a role in successful cutting and should be determined by trial cuts.