Reduction rings for circular saw blades

Category image

The bore of your saw blade can be reduced by using a reduction ring. The saw blade can thus be used on motor shafts with smaller diameters.

NOTE

Ring must not be thicker than saw blade body
Ring may be slightly thinner than saw blade body

Reduction ring, ground 16 x 12.7 x 1.6 mm

Reduction ring, ground 16 x 12.7 x 1.6 mm

AD 16 mm | ID 12.7 mm | Thickness 1.6 mm

Reduction ring, ground 16 x 13 x 1,5 mm

Reduction ring, ground 16 x 13 x 1,5 mm

AD 16 mm | ID 13 mm | Thickness 1.5 mm

Reduction ring, ground 18 x 16 x 1.4 mm

Reduction ring, ground 18 x 16 x 1.4 mm

AD 18 mm | ID 16 mm | Thickness 1.4 mm

Reduction ring, ground 18 x 16 x 1.6 mm

Reduction ring, ground 18 x 16 x 1.6 mm

AD 18 mm | ID 16 mm | Thickness 1.6 mm

Reduction ring, ground 20 x 10 x 1.4 mm

Reduction ring, ground 20 x 10 x 1.4 mm

AD 20 mm | ID 10 mm | Thickness 1.4 mm

Reduction ring, ground 20 x 12.7 x 1.4 mm

Reduction ring, ground 20 x 12.7 x 1.4 mm

AD 20 mm | ID 12.7 mm | Thickness 1.4 mm

Reduction ring, ground 20 x 12.7 x 1.6 mm

Reduction ring, ground 20 x 12.7 x 1.6 mm

AD 20 mm | ID 12.7 mm | Thickness 1.6 mm

Reduction ring, ground 20 x 13 x 1.4 mm

Reduction ring, ground 20 x 13 x 1.4 mm

AD 20 mm | ID 13 mm | Thickness 1.4 mm

Reduction ring, ground 20 x 13 x 1.6 mm

Reduction ring, ground 20 x 13 x 1.6 mm

AD 20 mm | ID 13 mm | Thickness 1.6 mm

Reduction ring, ground 20 x 15 x 1.6 mm

Reduction ring, ground 20 x 15 x 1.6 mm

AD 20 mm | ID 15 mm | Thickness 1.6 mm

Reduction ring, ground 20 x 16 x 1.4 mm

Reduction ring, ground 20 x 16 x 1.4 mm

AD 20 mm | ID 16 mm | Thickness 1.4 mm

Reduction ring, ground 20 x 16 x 1.6 mm

Reduction ring, ground 20 x 16 x 1.6 mm

AD 20 mm | ID 16 mm | Thickness 1.6 mm

Reduction ring, ground 20 x 16 x 1.8 mm

Reduction ring, ground 20 x 16 x 1.8 mm

AD 20 mm | ID 16 mm | Thickness 1.8 mm

Reduction ring, ground 20 x 16 x 2.0 mm

Reduction ring, ground 20 x 16 x 2.0 mm

AD 20 mm | ID 16 mm | Thickness 2.0 mm

Reduction ring, ground 20 x 16 x 2.2 mm

Reduction ring, ground 20 x 16 x 2.2 mm

AD 20 mm | ID 16 mm | Thickness 2.2 mm

Reduction ring, ground 20 x 16 x 2.6 mm

Reduction ring, ground 20 x 16 x 2.6 mm

AD 20 mm | ID 16 mm | Thickness 2.6 mm

Reduction ring, ground 20 x 18 x 1.4 mm

Reduction ring, ground 20 x 18 x 1.4 mm

AD 20 mm | ID 18 mm | Thickness 1.4 mm

Reduction ring, ground 22 x 20 x 1.4 mm

Reduction ring, ground 22 x 20 x 1.4 mm

AD 22 mm | ID 20 mm | Thickness 1.4 mm

Reduction ring, ground 22 x 20 x 1.6 mm

Reduction ring, ground 22 x 20 x 1.6 mm

AD 22 mm | ID 20 mm | Thickness 1.6 mm

Reduction ring, ground 22 x 20 x 1.8 mm

Reduction ring, ground 22 x 20 x 1.8 mm

AD 22 mm | ID 20 mm | Thickness 1.8 mm

Reduction ring, ground 22 x 20 x 2.0 mm

Reduction ring, ground 22 x 20 x 2.0 mm

AD 22 mm | ID 20 mm | Thickness 2.0 mm

Reduction ring, ground 22.23 x 20 x 1.4 mm

Reduction ring, ground 22.23 x 20 x 1.4 mm

AD 22.23 mm | ID 20 mm | Thickness 1.4 mm

Reduction ring, ground 22.23 x 20 x 1.6 mm

Reduction ring, ground 22.23 x 20 x 1.6 mm

AD 22.23 mm | ID 20 mm | Thickness 1.6 mm

Reduction ring, ground 25 x 16 x 1.4 mm

Reduction ring, ground 25 x 16 x 1.4 mm

AD 25 mm | ID 16 mm | Thickness 1.4 mm