Engineers Triangle 200 PCB scribing angle

Properties & Advantages

• The marking angle makes it easy to mark all angles between 0° and 90° - in 0.5 mm increments.
• You can hardly work more precisely by hand - laser-cut scale at 0.5 mm intervals with pin guides every mm.
• Practical for turning: centre finder for square and round workpieces.
• Highly flexible - the fibreglass PCB material makes the tool flexible and resistant.
• Can be used on both sides.
• Marking dovetail joints is child's play - 4 angles are already laser-cut. Only a 20 mm allowance is required for this.
• It is best to use a 0.5 mm lead pencil to mark out the openings. Of course you can also use a sharpened pencil.