Protection against dirt, chemicals and UV radiation
Shipping within 24 hours (working days)
14,95 €
incl. VAT
Art.-Nr: HO-RE-4013
3 Products
Technical Data
Minimum pouring height: 1 cm
Maximum pouring height: 5 cm
Mixing ratio resin : hardener: 100 : 45
Processing temperature: 20 °C
Processing time at 20 °C: 2 - 4 hours
Tack-free / next layer possible at 20 °C: 3 days
Deformable after: 4 days
Final strength: 8 days (After reaching final strength: intermediate sanding required for casting the next layer!)
Heat-resistant up to: 60 °C
Content: 1.45 kg
Storage: dry, at 10-25 °C, without exposure to sunlight
Storage stability: approx. 6 - 9 months in the sealed original container
Properties & Advantages
The resin and hardener set comes in the correct mixing ratio of 100:45.
The epoxy resin is UV-resistant and is suitable, for example, for the production of resin-wood lamps and small river tables or ocean tables.
Suitable for colouring with up to a maximum of 10% colour paste, pigment or concentrate.
Temperature-resistant up to 60 °C.
Important: Potting volume and layer thickness are interdependent. The thicker the layer, the smaller the mixing volume must be!
An ambient temperature above 20 °C can cause the mixture to boil and lead to boiling bubbles, stress cracks and discolouration!
Not suitable for layer thicknesses of less than 1 cm.Processing instructions: The objects to be embedded must be clean and free of dust, oil and grease. The moisture content of the wood must be below 13%.
