Our experts are here for you!
+49 8152 92898-88
info@sautershop.com
FESTOOL - all Festool articles
Routing Dowel Routers DOMINO

Festool Dowel Routers DOMINO

DOMINO Dowel Router DF 500
DOMINO Dowel Router DF 500
DOMINO Dowel Router DF 700
DOMINO Dowel Router DF 700
Accessories for Dowel Routing Machine
Accessories for Dowel Routing Machine
FAQ, Videos and more

Differences between the Festool dowel routers DF 500 and DF 700

The two domino routers differ primarily in the size of the dowels that can be used. The range of possible applications is thus considerably extended:

  • DF 500: For joining narrow and thin workpieces.
  • DF 700: With dowels up to 14 x 140 mm also for large and heavy components
More Information

66 Article found

Festool DOMINO router D 10-NL 70 HW-DF 700 F-497869

Festool DOMINO router D 10-NL 70 HW-DF 700

For DF 700 | D 10 mm | NL 70 mm
Delivery time 1-2 days
Article no.: F-497869
 
EUR 75.14
incl. 19% VAT
Festool DOMINO router D 12-NL 70 HW-DF 700 F-497870

Festool DOMINO router D 12-NL 70 HW-DF 700

For DF 700 | D 12 mm | NL 70 mm
Delivery time 3-10 days
Article no.: F-497870
 
EUR 79.50
incl. 19% VAT
Festool DOMINO router D 14-NL 70 HW-DF 700 F-497871

Festool DOMINO router D 14-NL 70 HW-DF 700

For DF 700 | D 14 mm | NL 70 mm
Delivery time 1-2 days
Article no.: F-497871
 
EUR 83.67
incl. 19% VAT
Festool Drilling template BS-KV D15 F-203164

Festool Drilling template BS-KV D15

Drill guide Ø: 15 mm | Panel thickness: 18 - 28 mm
Delivery time 1-2 days
Article no.: F-203164
 
EUR 84.64
incl. 19% VAT
Festool DOMINO connector range SV-SYS D14 F-576795

Festool DOMINO connector range SV-SYS D14

Festool fasteners in Systainer | Extensive selection
Delivery time 1-2 days
Article no.: F-576795
 
EUR 297.12
incl. 19% VAT
Festool Systainer³ SORT-SYS3 M 137 DOMINO F-576796

Festool Systainer³ SORT-SYS3 M 137 DOMINO

Perfect addition to the Domino DF500
Delivery time 1-2 days
Article no.: F-576796
 
EUR 87.32
incl. 19% VAT

Domino - the innovative joining system from festool

The Festool DF 500 and DF 700 dowel routers facilitate the production of precise wooden joints, allow fast and efficient work, and are characterised by ergonomic and intuitive operability. The Domino flat dowels used combine the advantages of the loose form tongue with those of the traditional round dowel.

The vertical and horizontal position of the milled holes for the DOMINO flat dowels is determined by corresponding stops, so that measuring and marking out work is largely unnecessary. The size (width, thickness and length) of the flat dowels used can also be conveniently set on the router, either to cut precise sockets for the selected dowel or to rout slotted holes with a tolerance allowing for later adjustments.

In addition to flat dowels made of beech or for outdoor use made of weather-resistant Sipo, the routers can also be used to produce sockets for frames and furniture connectors. This enables the construction of stable but dismantlable furniture.