NVR Safety Switch and Fixing Kit

incl. mounting kit for sauter underframes | required protective device on the router table | up to 3,000 W

Brand: sauter
Article-No.: SET-TRIPUS-KIT-UG
Weight: 0.488 kg

EUR 52.69

incl. VAT / excl. shipping costs
Depending on the delivery address, the VAT may vary at the checkout.

Delivery time 1-2 days

Safety switch (No voltage return) for Router Tables and fixing kit

Protects against automatic restart in case of power interruption

Note: Most hand routers purchased after Jan 2022 are fitted with auromatic restart protection as standard, therefore making the use with an NVR switch impractable as the router must be turned or again from under the router table after every use. Check the manufacturers instructions to see if your router is compatable. Router motors are not affect by this rule.

Technical Data

Protection class: IP44
Operating current IE: 13.5 A/250 V
Universal control voltage UC: 230 V/50 Hz
Utilization category AC3: 3 kW
Only available with a standerd EU 2-pin socket

Features and advantages

the safety switch consists of: Earthing contact socket, earthing contact plug, on-off button and zero-voltage coil 230 V
the switch is ready for connection and easy to install.
The fixing kit allows easy attachment to the sauter router table underframes