Perles Router OF3 + 12 Piece ENT Bit Set

Perles Router OF3 + 12 pcs ENT Bit Set in Wooden Storage Box

Small, compact, extremely successful manual router + Cutters with excellent tungsten/carbide quality

Similar to ELU MOF 96, a device that was used for decades in the joinery sector. For small, fine work at high precision. Also fully compatible with TREND and to some extent with old ELU accessories. Middle class  machine - for fine work in advanced to professional use.

ENT 12-piece Router Bit Set in Wooden Storage Box

Cutters with excellent tungsten/carbide quality

This set enjoys is one of our best sellers. Long tool life and best cutting results thanks to excellent carbide quality. The 12 rbitsare stored safely and clearly arranged in a practical wooden case

Technical Data

• Output: 1,010 watts
• adjustable speed: 9.000 - 27.000 rpm
• Stroke: 0 - 50 mm
• Collet: 8 mm --> Collets 6 and 6.35 mm (1/4"") available separately
• Copy ring: 30 mm --> more guide bushes separately available
• Dimensions of the base plate: 150 x 110 mm
• Max. Cutter-Ø: 40 mm
• Diameter suction connection ID 36 mm
• Diameter of suction connection AD 39 mm
• Distance between the holes for parallel guidance: 84 mm
• Distance and diameter of the lifting rods/column guide: approx. 130 mm (measured outside) / 15 mm
• Cable length: 2.5 m
• Weight: 2,85 kg

Cutters with excellent tungsten/carbide quality

• 3 Slot router bits- Ø8 mm; 12 mm; 16 mm x 20 mm
• 1 Trimming router bit with ball bearing Ø 12.7 x 25.4 mm
• 2 Rounding cutters with ball bearing (R6; R10)
• 1 Radius router bit R6 / Ø 12 mm
• 1 Dovetail Cutter 14° / Ø 14,3
• 1 V-Slot routing bit 90° / Ø 12.7 mm
• 1 Radius cutter with ball bearing R6 / Ø 21.5 mm
• 1 Roman profile cutter R4
• 1 Chamfer cutter with ball bearing 45°

Features and advantages

• small and very handy for highest comfort in manual operation
• low weight - ideal for edge processing and precision work
• electronic speed regulation and soft start through constant electronics
• with electro. Motor overload protection
• ideal for manual operation - for smaller, finer work
• suitable for rounding, chamfering, profiling and rebating, grooving, engraving and template work.
• with copy ring 30 mm
  --> also compatible with all TREND and parts of the old ELU accessories, no matter if , 
• suitable for bits with a max. diameter of 40 mm
• very precise side stop with micro-fine adjustment
• On/off switch WITHOUT locking function (restart protection)
• Fine height adjustment must be purchased separately --> Fine adjustment for OF3E
• Delivery without case

Scope of delivery

• 3 Slot router bits- Ø8 mm; 12 mm; 16 mm x 20 mm
• 1 Trimming router bit with ball bearing Ø 12.7 x 25.4 mm
• 2 Rounding cutters with ball bearing (R6; R10)
• 1 Radius router bit R6 / Ø 12 mm
• 1 Dovetail Cutter 14° / Ø 14,3
• 1 V-Slot routing bit 90° / Ø 12.7 mm
• 1 Radius cutter with ball bearing R6 / Ø 21.5 mm
• 1 Roman profile cutter R4
• 1 Chamfer cutter with ball bearing 45°

• 1x router,
• 1x rip fence with fine adjustment,
• 1x suction connection,
• 1x collet chuck 8 mm,
• 1x copy ring 30 mm,
• 1x Wooden storage case