Pivoting Router Lift OFL3.0K
Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-°
for router motors with neck holder Ø 43 mm
exact height fine adjustment & magnetic reduction plates
- Brand sauter
- Order number: SA-OFL3.0K
- Weight 6.96 kg
Delivery time 1 - 2 days **
Prices incl. 19% VAT, excl. shipping costs. Depending on the delivery address, the VAT may vary at the checkout.
Pivoting Router Lift OFL3.0K for your Router Table
For all those who already use a Kreg inlay plate and want to change to an OFL!
The first and only one of its kind - pivoting lift from -5 to 50 degrees
The OFL3.0K - the variant in the Kreg insert plate format - for router motors with 43 mm clamping neck including swivel mechanism that only professional tables use. Solid and great workmanship. Ideal for small workshops or, due to short set-up and configuration times, also ideal next to the large spindle moulder -Genuinely Made in Germany!
Why this router lift?
- Pivots from -5° to 50°
- Classic snap-in points 22.5°, 30°, 45° and 90°
- No Routing Depthloss!
- Easiest cutter change thanks to upward looking spindle and collet chuck!
- Innumerable routing possibilities - grooves, Rebating, chamfers, mitre cuts, etc. - all with only 1 Slot Routing Cutter!
Simple operation of the router lift
- Height adjustment via rotary handle above.
- Angle locking via a lever below.
- Centering in the slotted hole by means of two levers also below.
- Here we go.
Technical data:
- Dimension insert plate: 298 x 235 x 9 mm
- Corner radius Insert plate: 19.05 mm (3/4")
- Height adjustment travel/rotation: 4 mm
- Max. Adjustment travel: 101 mm
- Height milling lift (max. extended): 240mm
- Max. Cutter diameter: 55 mm
- Weight: approx. 5 kg
Further advantages and characteristics:
- Quality from Germany
High quality, solid construction. Construction of high quality aluminium and steel. - Fine height adjustment to 1/10mm
Height fine adjustment extremely precise adjustable, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw. - Smooth-running spindle columns
Enable a stepless and exact fine height adjustment. - Compatible to common Routing
The OFL3.0K is compatible with a wide range of commercially available milling motors with 43 mm Euro-neck. All models can be found below. - Safe Routing for any diameter
The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the milling cutter - especially for small workpieces, a "snagging and getting stuck" on the edge of the hole eliminated! - Assembly made easy
Simple mounting of the milling cutter to the mounting adapter. - Routing also without rip fence
2 drill holes for the fence pin allow you to free e.g. round workpieces without rip fence (see optional accessories separately - not in Delivery Includes). - Absolutely flat
Simple levelling of the OFL3.0K by means of levelling screws in the insertion plate. Optionally a frame for a permanent level adjustment can be purchased. - No own drillings necessary
Mounting holes (countersunk head) for quick Router Tableinstallation are already pre-drilled. - Lasered scaling
Millimeter scaling on the surface for exact alignment of the rip fence. - Additional recessed grip for easy changing of the reduction plates.
- Magnetism for mounting additional accessories is distributed over the entire reduction plate.
Directly compatible and approved milling motors:
- AMB (Kress): 530 FM, 800 FME, 1050 FME
- MAFELL: FM 800, FM 1000
- SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAK 30 RF SPZ12
- If your motor is not listed, please check the tolerances of the clamping neck for your model as specified by the manufacturer or contact us
- MAFELL FM1650PV-LO not compatable
-----------------------------------------------------------------------------------------
Delivery Includes :
- 1x Pivoting Router Lift OFL3.0K
- 2x reduction plates long hole Ø 16 and 32
- 1x reducing plate Ø 68 mm
- 1x hexagon screwdriver 5x150 mm
- 1x instruction manual (German)
Optional accessories:
- Height gauge: High-quality, magnetic setting gauge for tool-free operation with scale (Art. No. SA-99600004)
- Mounting kit: 20-piece mounting kit with 4x corner plates, 4x countersunk screws and 12x wood screws (Item No. SA-99600005)
- Levelling frame: Sheet steel frame for plate levelling (Art.No. SA-99600006)
- Digital measuring instrument: Digital height measuring instrument for 1/1000mm accurate Routing Depth adjustment (Part No. WX-WR525)
- Milling fence with protective shield: Arched or freemilling kit for Routing without rip fence (Art. No. SA-RTS-KIT)
- Compensation pieces for -Precision insert Router Tableplate: four Insert plate compensation pieces for Kreg insert plates PRS4034 / PRS 4038 (Art.No. KR-PRS3040)