Router Tableplate HPL sauter for Bosch GTS10XC

The sauter Router Tableplate for the Bosch GTS10XC circular saw

With cut-out for all sauter ELP insert panels and OFL router lifts

The sauter Router TableHPL-GTS10 plate is the perfect complement to your Bosch circular saw. With this plate you can turn the popular sawing machine into a multifunctional machine table with Circular saw and integrated Router Table. Perfectly matched to the sauter ELP insert panels and OFL router lifts. Naturally including a sauter profile rail for angle stops and Spring clips.

Assembly note: The Router Tableplate is inserted and clamped in the Sliding DrawGTS10XC. No further fastenings are required

Important notes:

• Not suitable for the GTS10 and GTS635-216
• Router Table-Plate not suitable for combinations OFL2.0-AD43 / OFL3.0 with Suhner router motor 1800W
• In connection with the OFL1.0 / OFL2.0 and the Bosch GOF1250CE/LCE we recommend the additional router extension T-CE-88 to compensate the loss auszugof height (handle of the router hits the housing of the GTS10)

Technical Data

• Plate dimensions: 612 x 306 x 40 mm
• Dimensions of the cut-out: 307 x 230 x 10.5 mm
• Weight: approx. 7 kg

Features and advantages

• An anodised sauter C-profile rail for milling fences and other accessories such as spring clamps is already fitted
• Milling for insert panels in the middle with matching rebate
• Material surface: birch multiplex with HPL coating
• Very durable and plane multiplex board with HPL coating made of 40 mm thick material
• Including 1 mm thick levelling frame for perfect alignment of the inlay plate or the routerlift
• Includes 4 shims (thickness 1 mm) to compensate for minimal height auszugdifferences if necessary

Scope of delivery

• 1x Router Tableplate incl. profile rail
• 1x levelling frame
• 4x shims
• installation instructions