multi-schleifvorrichtung-tormek-tm-svs-50-01

multi-schleifvorrichtung-tormek-tm-svs-50-02

multi-schleifvorrichtung-tormek-tm-svs-50-03

multi-schleifvorrichtung-tormek-tm-svs-50-04

multi-schleifvorrichtung-tormek-tm-svs-50-05

Tormek SVS-50 Multi Grinding Jig

Two interchangeable holders for different tool types | Easy sharpening of oval or rectangular blades

Delivery time 2-3 days

64,26 €

incl. VAT / excl. shipping costs

Brand:Tormek
Article no.:TM-SVS-50
Weight:0.45kg

Tormek SVS-50 Multi Grinding Jig

A real all-rounder when it comes to tool sharpening.

The closed seat allows you to sharpen the vast majority of skew chisels with precision, regardless of whether they have a rectangular or rounded blade and a straight or rounded edge. The tool is mounted vertically in the center of the jig, so you only need to mount the tool once to sharpen two sides. When you've finished one side, turn the jig upside down and then grind the tool to a symmetrical shape.

You can also sharpen chisels with oval cross-sections thanks to a unique and patented design, as well as your chisels with rectangular blades. The jig straightens the chisel so that it's parallel to the universal support, allowing you to sharpen both straight and rounded edges. Maximum woodturning chisel width is 32 mm (1.3").

The open seat, where the tool is mounted with the top screw, is best used for tools with an edge across the longitudinal direction. It's also ideal for sharpening woodturning parting tools, roughing gouges and wide carving gouges. Both the open and closed seat are mounted using a bottom screw, which also locks it at the selected angle.

Do you have a new woodturning tool and need to remove a lot of steel to change its profile? The BGM-100 Bench Grinder Mounting Set will allow you to use the SVS-50 Multi Jig on a bench grinder too. But you have to be careful not to overheat the edge here. When you've completed the initial rough sharpening on the bench grinder, you then switch to the Tormek machine and give the edge its final sharpness

Technical Data

Maximum chisel width: 32 mm
Material: Precision die-cast zinc, black composite
Weight: 0.17 kg

Properties & Advantages

The grinding device consists of an open holder for tools with the cutting edge at right angles to the shaft and a closed holder for bevelled chisels.
Bevelled chisels with round or straight blades and straight or rounded cutting edges can be ground symmetrically simply by turning the jig.
For sharpening turning tools, we recommend combining it with the TTS-100 setting gauge for turning tools; this makes it easy to reproduce the shape and cutting angle.
With the BGM-100 mounting kit for double grinders, the Multi device can also be used on a double grinder to remove a lot of steel.
Compatible with the Tormek T-4, T-8 and older models.
Tormek gives a 2-year guarantee on the device.