einstelllehre-drehstaehle-tormek-tm-tts-100-01

einstelllehre-drehstaehle-tormek-tm-tts-100-02

einstelllehre-drehstaehle-tormek-tm-tts-100-03

Tormek TTS-100 Turning Tool Setter

For a perfect sharpening result on turning tools | For adjusting the jig for gouges and the Multi jig

Shipping within 24 hours (working days)

27,99 €

incl. VAT / excl. shipping costs

Brand:Tormek
Article no.:TM-TTS-100
Weight:0.14kg

Tormek TTS-100 Turning Tool Setter

Used with the SVD-186 R Gouge Jig and SVS-50 Multi Jig.

The TTS-100 Turning Tool Setter allows you to repeat the exact sharpening angle of most woodturning tools with incredible ease once you know your profiles. It only takes a few seconds, making the sharpening process significantly faster.

The TTS-100 Turning Tool Setter works independently of the diameter of the grinding wheel. You always get the same bevel angle – even if your grindstone gets worn smaller over time. So you can also use the turning tool setter when setting the bevel angle on the honing wheel.

Compatible accessories

Tormek PL-01 Profile Labels

Easy to read the sharpness setting for each tool

Shipping within 24 hours (working days)

5,05 €

incl. VAT

Art.-Nr: TM-PL-01

multi-schleifvorrichtung-tormek-tm-svs-50-01

Tormek SVS-50 Multi Grinding Jig

Two interchangeable holders for different tool types | Easy sharpening of oval or rectangular blades

Shipping within 24 hours (working days)

64,26 €

incl. VAT

Art.-Nr: TM-SVS-50

schleifvorrichtung-roehren-tormek-tm-svd-186r-01

Tormek SVD-186 R Gouge Grinding Jig

Sharpens all your gouges and other tools with complex shapes | Works with both Tormek T-4 and Tormek T-8

Shipping within 24 hours (working days)

100,67 €

incl. VAT

Art.-Nr: TM-SVD-186R

3 Products

Technical Data

Material: Plastic

Properties & Advantages

The setting gauge makes it easy to repeat the exact grinding angle of most turning tools.
The diameter of the grinding wheel does not matter, the bevel angle always remains the same.
Three factors affect the shape of the tool: the setting of the jig, the projection of the tool from the jig and the distance to the grinding wheel - all reproducible thanks to the setting gauge.
To repeat the tool angle and profile, simply write the respective setting on the file labels.
After the first shaping, the setting gauge is used to remove as little material as necessary to get the tool razor-sharp again - for maximum tool life.
For a new mould on a turning tool, the gauge can also be used in combination (with the BGM-100 assembly set) on a double grinder, then this profile can be used again on the wet grinder for honing.

Tormek TTS-100 Turning Tool Setter

For a perfect sharpening result on turning tools | For adjusting the jig for gouges and the Multi jig

Tormek TTS-100 Turning Tool Setter