Countersinks & Countersink Drills

Countersinks

Countersink Drill

Countersinks

Slip-on Countersink

FAQ, Videos and more

Some fittings need to protrude above the surface of the material for technical reasons, while for others this is desired for aesthetic reasons. Often, however, screws should be countersunk so that they are flush with the surface. Countersinks and countersink drills are used in woodworking for precisely this purpose. Achieved by working with a countersink the screw to be inserted is absolutely flat to the workpiece.

More Information

Festool Deburring countersink QLS D 5-15 CE

Cross hole countersink QLS D5-15 CE | Diameter: 5-15 mm

Delivery time 3-10 days

Article no.: F-492521

EUR 51.91

incl. 19% VAT

Festool Drill countersink BSTA HS D 5 CE

Countersink with depth stop BSTA HS D5 CE | Diameter: 5 mm | Package contents: 1 pc.

Delivery time 1-2 days

Article no.: F-496451

EUR 87.00

incl. 19% VAT

Seven-edged countersink with pointed angle 90° Set

in a wooden box | Countersink Ø: 10, 13, 16, 20, 25 mm

Delivery time 1-2 days

Article no.: FA-177550500

EUR 99.00

incl. 19% VAT

Slip-on countersink d 10 mm

in DURADRILL quality | d 10 mm

Delivery time 1-2 days

Article no.: E-50510

EUR 11.71

incl. 19% VAT

FAMAG Pre-drill 4 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 4 mm

Delivery time 1-2 days

Article no.: FA-357714000

EUR 5.58

incl. 19% VAT

FAMAG Pre-drill 5 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 5 mm

Delivery time 1-2 days

Article no.: FA-357715000

EUR 6.10

incl. 19% VAT

Terrace drill countersink set 4 pieces

in a wooden box | Drill-Ø: 4, 5, 6 mm | with depth stop

Delivery time 1-2 days

Article no.: FA-357750400

EUR 76.97

incl. 19% VAT

Festool Deburring countersink QLS D 2-8 CE

Cross hole countersink QLS D2- 8 CE | Diameter: 2-8 mm

Delivery time 3-10 days

Article no.: F-492520

EUR 42.01

incl. 19% VAT

90° countersink drill set Trend 5-piece

Drill Ø: 2.0 mm | 2.4 mm | 2.8 mm | 3.2 mm | 3.6 mm

Restocking soon

Article no.: T-CR-QR-CS-SET

EUR 31.57

incl. 19% VAT

Drill countersink set ENT 5 pieces

in a plastic case | D 4-5-6-8-10 mm

Delivery time 1-2 days

Article no.: E-26515

EUR 59.00

incl. 19% VAT

Festool Drill countersink BSTA HS D 3,5 CE

Countersink with depth stop BSTA HS D3,5 CE | Diameter: 3,5 mm

Delivery time 1-2 days

Article no.: F-492523

EUR 78.68

incl. 19% VAT

Festool Drill countersink BSTA HS D 4,5 CE

Countersink with depth stop BSTA HS D4,5 CE | Diameter: 4,5 mm

Delivery time 1-2 days

Article no.: F-492524

EUR 83.03

incl. 19% VAT

Festool Spare part drill bit EB-BSTA D 5/5

Spare drill EB-BSTA D 5/5 | Diameter: 5 mm | Package contents: 5 pcs.

Delivery time 3-10 days

Article no.: F-496452

EUR 22.16

incl. 19% VAT

FAMAG Pre-drill 3 mm

Matching FAMAG Terrace Drill- Countersink Set | Drill- Ø: 3 mm

Delivery time 1-2 days

Article no.: FA-357713000

EUR 3.67

incl. 19% VAT

Attachable countersink set ENT 5-piece HSS

for wood twist drills with Ø 4-5-6-8-10 mm | perfect complement for the HSS-G wood twist drills from ENT

Delivery time 1-2 days

Article no.: E-26516

EUR 29.90

incl. 19% VAT

ENT Slip-on Countersink HSS-G Ø 2 mm

d: 2 mm | D: 12 mm | E: 90° | GL: 25 mm

Delivery time 1-2 days

Article no.: E-50502

EUR 9.34

incl. 19% VAT

ENT Slip-on Countersink HSS-G Ø 2.5 mm

d: 2,5 mm | D: 12 mm | E: 90° | GL: 25 mm

Delivery time 1-2 days

Article no.: E-50525

EUR 9.34

incl. 19% VAT

ENT Slip-on Countersink HSS-G Ø 3 mm

d: 3 mm | D: 12 mm | E: 90° | GL: 25 mm

Delivery time 1-2 days

Article no.: E-50503

EUR 9.71

incl. 19% VAT

ENT Slip-on Countersink HSS-G Ø 3.5 mm

d: 3,5 mm | D: 12 mm | E: 90° | GL: 25 mm

Delivery time 1-2 days

Article no.: E-50535

EUR 9.71

incl. 19% VAT

ENT Slip-on Countersink HSS-G Ø 4.5 mm

d: 4,5 mm | D: 12 mm | E: 90° | GL: 25 mm

Delivery time 3-8 days

Article no.: E-50545

EUR 9.71

incl. 19% VAT

Countersink drill SET

5-piece countersink set with HSS drills | Drill Ø: 2.0 mm | 2.5 mm | 2.75 mm | 3.25 mm | 3.5 mm

Delivery time 1-2 days

Article no.: T-SNAP-CS-SET

EUR 47.60

incl. 19% VAT

90° countersink with drill D1: 2.0 mm

with hex shaft 1/4" (6.3 mm) | D1: 2.0 mm | D: 9.5 mm | L: 54 mm

Delivery time 1-2 days

Article no.: WP-AS02004S

EUR 15.08

incl. 19% VAT

Drill countersink set WS

IØ: 3 mm | AØ: 16 mm | NL: 15 mm | GL: 60 mm

Delivery time 1-2 days

Article no.: FA-357303000

EUR 17.20

incl. 19% VAT

HM push-on countersink VARIO set 3- 8 mm

IØ: 3-8 mm | AØ: 10,5-14,5 mm | GL: 34 mm | a: 90°

Delivery time 1-2 days

Article no.: FA-220200000

EUR 39.88

incl. 19% VAT

COUNTERSINKING SCREWS AND OTHER FITTINGS FLUSH WITH THE MATERIAL SURFACE

Basically, three different tools are suitable for countersinking screws:

The upper end of the hole drilled for the screw can be widened with a countersink so that the screw can be screwed in so far that its head is below the surface of the wood. This requires two operations (drilling and countersinking), as well as a tool change.
With a countersink drill, there is no need to change tools and there is only one operation. The drill is fitted with a countersink so that the guide hole for the screw and the countersink can be drilled in one go.
Instead of keeping drill countersinks of the appropriate diameter for countersunk holes, the existing drills can also be fitted with appropriate slip-on countersinks. This solution offers the additional advantage that blunt drills can easily be replaced by sharp ones instead of having to resharpen them.

Basically, pre-drilling the screw hole is essential for screw fastened joints, because pre-drilling and countersinking the screw hole at the same time prevents the wood from splitting.

For hexagonal screws and similar fittings, you can also countersink with a tenon countersink. These tools are similar to the well-known Forstner drills and, like them, cut a blind hole with a flat drilled base.