Hinge Sinker Bit HM

Hinge Sinker Bit fitted with tungsten-carbide (HM) with centering point, two main cutting edges and pre-cutting edges
Specially applicable in bench drills, upright drills and automatic drills
For drilling hardwood, laminated wood as well as coated and uncoated board materials
Large selection of diameters (15 - 40 mm)
Many possible combinations
No re-sharpening necessary, thus dimensional accuracy is guaranteed
Long service life due to the use of HW reversible blades of highest quality level
Very good price/performance ratio

TORX® Screw SW T15

SW T15 | D M4 | L 8 mm | DK 5.6 mm | BK 2

5,36 €

TORX® Screw SW T7

SW T7 | D M2,5 | L 4.5 mm | DK 3 mm | BK 1

5,36 €

Torx key T7

for drill head 1 | width: T7

5,16 €

Torx key T15

for drill head 2 & 3 | wide: T15

5,16 €

Exchangeable Shank for ENT Drilling System D: 10 mm

D 10 mm | L 90 mm | BK 1/2/3

18,34 €

Reversible Knife for ENT Drilling System D 19 mm

D 19 mm | BK 1 | Rot R

60,84 €

Reversible Knife for ENT Drilling System D 25 mm

D 25 mm | BK 2 | Rot R

59,55 €

Reversible Knife for ENT Drilling System D 24 mm

D 24 mm | BK 2 | Rot R

62,01 €

Reversible Knife for ENT Drilling System D 35 mm

D 35 mm | BK 3 | Rot R

70,47 €

ENT drilling system

The flexibly combinable ENT drilling system consists of drill heads, reversible blades and interchangeable shafts. The individual parts can be combined in different ways to form one tool be assembled or separated. There are three drill heads of different sizes to choose from, a large number of reversible blades from 15mm to 40mm in diameter, and several interchangeable shafts for the tool holder in various machines.

Advantages, such as the compactness of fixed-tip drills, the versatility of tools with reversible blades, and the flexibility of adjustable tools simplify machining. Due to the reversible blades, the expensive re-sharpening of the tool is no longer necessary. You always have access to a ready-to-use tool.