Mini Flush Trim Bit With Upper Ball Bearing Ø: 4.8 mm

D: 4.8 mm | NL: 12 mm | GL: 51 mm | S: 6 mm

Shipping within 24 hours (working days)

51,17 €

43,49 €

incl. VAT / excl. shipping costs

D: 4.8 mm | d: 2.4 mm | H: 2.4 mm

Shipping within 24 hours (working days)

8,09 €

6,88 €

incl. VAT

Art.-Nr: KLE-Z050-037-N

1 Products

Suitable for trimming and routing with portable router machines using the template on the upper side while the cutters make clean cut to avoid chipping marks.
To be used on hand held or table mounted portable machines.
Suitable for trimming and milling on every type of wood
Perfect for guitar makers
Please note: Due to the ball bearing at the top, the diameter of the cutter at this point is only 2.4 mm. Special care must be taken when working here, as the tool can break off more easily than other milling cutters if too much chip removal or pressure is applied!