CNC Router Collets
Collets are the bit holder on a router motor.
Depending on the shaft diameter of the router cutter, a different collet with the respective clamping dimension for the shaft is required. For our CNC cutters there are collets from 3 mm to 10 mm or 1/4".
Depending on the model and manufacturer, the shape of the collet for the router may differ technically. Also the quality of the tool holders is often very different. In our online shop for routing tools we only carry collets of the original manufacturers and no simple replicas. Therefore the exact and safe fit of the cutters in the motor is always guaranteed.
Read more
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41127Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41128Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41129Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41130Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41131Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41132Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41133Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41134Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41135Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-40905Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41136Delivery in 1-2 business days
Balanced precision collet chuck | For 1050 FME-P & 1050 FME-W
Item no.: AMB-41137Delivery in 1-2 business days
Balanced precision collet | For all milling motors with ER16 receptacle
Item no.: TI-426E-12Delivery in 1-2 business days
Standard union nut for AMB milling motor FME-1
Item no.: AMB-21208Delivery in 1-2 business days
Standard collets incl. union nut Ø- 10 mm | for 1050 FME-1, 800 FME-Q, 800 FME, 530 FM
Item no.: AMB-91482002Delivery in 1-2 business days
Standard collets incl. union nut Ø- 8 mm | for 1050 FME-1, 800 FME-Q, 800 FME, 530 FM
Item no.: AMB-91482001Delivery in 1-2 business days
Standard collets incl. union nut Ø- 6,35 mm | for 1050 FME-1, 800 FME-Q, 800 FME, 530 FM
Item no.: AMB-91477101Delivery in 1-2 business days
Standard collets incl. union nut Ø- 6 mm | for 1050 FME-1, 800 FME-Q, 800 FME, 530 FM
Item no.: AMB-91434601Delivery in 1-2 business days
Compatible with the Shaper Origin (Gen1, Gen2)
Item no.: ST-SD1-6Delivery in 1-2 business days
Compatible with the Shaper Origin (Gen1, Gen2)
Item no.: ST-SD1-3Delivery in 1-2 business days
Standard collets incl. union nut Ø- 4 mm | for 1050 FME-1, 800 FME-Q, 800 FME, 530 FM
Item no.: AMB-98040103Delivery in 1-2 business days
Compatible with the Shaper Origin (Gen1, Gen2)
Item no.: ST-SD1-8Delivery in 1-2 business days
1/8” | 3.175 mm | for Shaper Origin
Item no.: ST-SC1-1250Delivery in 1-2 business days
Care tips for collets and nuts
Industrial collets should be cleaned from time to time in a little solvent after use, re-protected against corrosion and never opened by force. Damaged collets should be replaced immediately, otherwise there is a risk of further damage and the router bit falling out.
In our shop you will find collets for almost all brands. So also for models from AMB, Mafell and many more.